Search results

As far as i know, should the coupling shaft housing Not move at all, when the propshaft is turning inside, Right?

You get it Bob, but how is it possible? Did the U-Joint have different outer diameters? My Idea was to Place a thick gasket to „move“ the coupling shaft housing a Little Bit more to the front?

Good Evening Everybody, just finished to install The 2 New u-joints on my 1934 1.5 Ton Truck ( Long wheel base) and have The following Problem. When i turn a rear wheel, the Front coupling shaft housing starts to turn too. Seems like it has contact to The rear U-joint. Instead of using a...

Sorry Bob, just checked your link, but i will try to find The u-joint repair kit. Cheers, Nico

Hi Bob, at First, thank's a lot for The fast reply:) Just checked online, seems hard to get these truck parts. Do you have any idea, where to get them? Thank's Nico

Good Evening Gentleman, The Prop-Shaft of my 1934 BB Truck touches the front coupling shaft housing when turning. After checking everything, the Universal joint had to much play and there was no retainer capscrew mounted.... So i ordered the screw B7095 (for B7090U) at Mac's, but the screw an...

Hi Brian, oh, that's o.k. it just turns backwards when moving the gearbox. Normaly it stands in up-direction :-)). Thanks for your help guys, and you are right. I dont want to bring him back to Heavy-Duty work. My wife and me are slim People...;-) Cheers, Nico

Hi Brian, at The early_ford_store of CA i found a 9" pressure-plate with 9 springs, its item Nr. 48-7563. That's make me thinking of, do i have enough pressure on the plate with only 6 springs for the weight of my 1 1/5 Ton Truck? How Big is the difference between 6 or 9 Springs in the...

At First, Merry Christmas to all of you. I have one more question regarding my 9" clutchplate. The Repair-Manual (Christmas Present) says, that the Trucks Always have pressure-plates with 9 Springs, instead of 6 Springs. Is that right? Are there any 9"clutchplates with 9 Springs? Maybe...

Hi Lukas, i am actually rebuilding a 1934 Dually Model BB 1 1/2 Ton Truck Long Wheel base with V8-Flatty. If you have Time, i am from Hamburg, only 4 Hours away. And you will get coffee in my Workshop :-)) Have a nice day, Nico

New Clutch is allready ordered at Fort Wayne :-) Thanks to all of you for the Support, i really aprecciate it!

What a Job, it takes me 3 hours to take the Clutch out of my truck ...

Great News, so i can take the clutch off with my 1 piece-oilpan in place?

Fort Wayne looks very good, but i cant find a 11" clutch in the webshop. What was the original diameter for the Truck clutch? Will check on wednesday my flywheel and diameter.

At first, thanks a lot to everybody for supporting me :) My truck has a 1937 V8 with 21 Studs. In some older Threads, i read that The actual clutch in my Truck was for Ford Traktor. The clutch engage, when i am on The Last threads of the connecting rod.... So, a cheap Solution would be, to...

Hej Murre, at First i have to take out the clutch, i think it's an 11" diameter. Will Start next week to take the clutch off. 1: would you operate from the front (pull engine out & leave ****** & bellhousing installed) 2: or work from rear (engine stays on frontmounts & pull & ******/belhousing...

At First, i was quite happy to see the clutches was already done...... O.K. so i have to change everything :( Where can i order the right parts in good quality? I don't think that Mac's has the right quality. Who is the best vendor for Ford clutches/pressure plates? Thank's a lot, Nico

Hello Gentlemans, what should be the right clutch parts für my 1934 Ford BB 1.5 Ton Truck? These Clutch is installed, but i am not happy because the clearance between the fingers & the bearing is far too much. Its the 4 Speed Transmission, but i am a little bit affraid to buy at Macs because of...

Hi Gentleman, the waterpumps of my 1936er 21 Stud Flathead have cast bosses for sending units. Do you know, if the sending bulbs for the cylinder heads fit's on them? ( Part Nr. 8A-10884 & 990 at Mac's ) Would you mount 2 for each cylinder-bank? And do you have any pictures of the old 6V...

Good Evening Gentlemans, i am looking for a NOS or very good pitman arm for my 1934 BB-Truck, Part No. BB-3590 Thank's a lot, Nico