Search results

5 or 6 years since rebuild; insert bearings; had been sitting before starting last summer. Oil should flow due to summer. (It was not 40 degrees out) How many total miles since rebuild? Most would assume you drove it around after installing the fresh engine, did you? How long had it been...

Y Blockhead may be the winner...I am about 7 miles away from LAX. I work in El Segundo. Stop in at the V on Catalina.

Re: Synchromesh or Overdrive What is a high speed rear end? Can you drive 60 continuously? I have the Borg Warner OD and use it on the freeway, but rarely on surface streets. It makes 60mph feel like 45 as far as engine noise. I have had it up to 70, but this is pushing the limits of the...

Since I run with a filter, I had it done, Renner’s Corner. Worked great on fixing the rich mix. I then had the spare carb done.

Not a radial, but Lester makes a 525/550 -19 with 3-7/8 WW. So, 1/2 inch wider with a modern tread pattern. Should be more stable at speed, but harder to turn slow. Anyone with experience with the Lester tire; 475/500 or 525/550?

Fitting the cost of things into ones budget is always critical. Not sure the BW vs WW price comparison is accurate. Yes, you can get a Lucas BW for 99, but the do not make a WW. Firestone, Bridgestone, Lester make both and the price difference is 34 or 40. Still for 4 tires, $160 buys a lot...

Like others, the JB weld will work, but first drain, drill ends, remove paint/ Drexel tool grind area, degrease with alcohol or brake cleaner. I patched holes in ‘58 Harley heads and it stayed good for over a decade. + on dropping oil pan. I just did mine. PO said he religiously maintained...

According to some articles, 140wt is the same thickness as 600w. Modern standard, NAPA and others have it. 85-140 works, but double clutching takes a fraction longer for gears to match speed to avoid a slight grind and I thought it was noisier. Had 600w, tried Dino and synthetic, before doing...

Installed one this weekend. I found that the thermo qual is accurate although the gauge is more responsive.

I got my 10A power supply from eBay, $30. Case is isolated so no issues mounting it. Separate-/+ in and out.

Great to know. I was thinking the halogens would be a nice upgrade when the time comes. I typically run with lights on, but got an alternator when the generator had issues. The regulator makes it easy and I was not sure about cooking the batt. From the old school stuff I have read, are spot...

Wonderful CA DMV can be a pain. I have gone through the VIN / registration grinder 3 times. 2 old motorcycles and the A. Both bikes required DMV referral to CHP inspection, the A was DMV only, but a wait for 2 different inspections on the same trip. Corrected the year for the A. Corrected...

The EPA issue with non-gasoline engine oil is the non-low friction additives. Motorcyclist have had these issues for years. Friction reducing additives are good for high gas mileage, but not so good for oil bath clutch plates. Rosella for my A? It is a good oil and was on sale, so yes, I...

How is the float valve landing on the float? If rough, the needle could be getting caught and kept from moving. New float valve? Check for stuff, grit or metal bits from matching it valve. Newer stuff seems to be not as good in recent lots.

Thank you! This information confirmed what I thought about my alternator. After noticing some odd light flicker, I decided to check things. Battery is charged and holds a load well. Alternator output at driving speed rpm was 9.7volts, at idle it was unreadable DC, but over 20 volts AC.

I removed the wipers...it doesn’t rain in SoCal. There is a song about it. One time I get caught out, the rainX did its job. Did not think about legal requirement. I need to check, if a wiper is required, I will add one hand wiper.

Ebay. I did a truck several years ago.. monster mat or something. Degrease surface before applying. A small roller works well.

Out of CA is very high due to the current wave of folks escaping. Used box trucks are available here and often cost more else where. I know folks who have purchased a truck then sold it when done as well as using a full container. What fits your needs and travel time?

Replaced head gasket and was pushing to get it started that night. Cranked, but no fire. Checked over everything, all looked good, but no go. Pulled distribution and rechecked, still nothing. So, called it a night. The next morning, with coffee cup in hand, I look over and see the rotor...

I have the same issue with a new Viton valve. Took it apart to clean and noticed two things 1. Viton tip is hard, like a coating on the metal or plastic. I expected more of a rubber like material. Softer stuff works great in bike carbs. 2. The body does did not have a face for the needle...