Search results

I went to start my 27 T and the coils will not buzz. I used a light meter to check if I was getting power. The light says I'm getting power to the coil box but coils will not buzz. Any idea what's wrong?

I'm in the final process of installing the starter. The the Bendix spring and gear won't move down the shaft. Any ideas what's going on?

Thanks for the info. It stays in position so I can run Magneto on the new switch.

I'm using a universal ignition switch in my 1927 Model T. How do I hook up the magneto to the switch. Would it connect to the run or start post on the switch?

I will go over my wiring again. I have a test light and see if everything is getting power. I know the ignition switch is getting power.

I'm getting power to the switch. The main wire is connected to the battery side of the starter switch. None of my accessories will work and no power to coils. Does the ignition switch need to be grounded to something?

I got a new ignition switch and a wire harness. I connected everything and nothing works. Any idea what might be going on? I have doubts checked everything and my wiring seems to be correct. I tried using different switches and still having issues.

I got a friend who owns a machine shop. He has just about everything you could imagine for Machine work. If you have dimensions that would be helpful.

MTFCA doesn't give much detail about the adapters. They tend to debate which methods work best for mounting and different people they know who can make them. Doesn't quite cover what I'm looking for. I just wanted to know if anyone had the specs for the adapters what size and width of the holes ect.

Does anyone know the specs on a Model T wheel adapter to mount Model A wheels onto Model T?

Can you hook up a modern universal ignition switch to a model T using the stock set up wire harness

Thanks I guess I will just get the adapter kit for the rims. I'm not prepared to do that much work for a set of rims.

Is it possible to change out Model T spindles with Model A spindles? If so what modification need to be done?

Hello, Everyone I purchased a new aftermarket ignition switch for my 1927 Model T. When I connected the wires the switch would not work. I checked my wiring and it's correct. Has anyone experienced this issue or any suggestions on how to solve it. Thanks

Will the adapter kit allow you to bolt 30-31 rims? I know most kits work with 1928-1929

I have a 1927 Model T and wanted to mount a set of model A rims. Does anyone know who sells adapter kits to fit A rims on a T

Will Model A wheels work on a Model T ? Or do I need to change spindels.

Thanks I just found a battery in my price range 650 cold cranking amps.

Looking to find a 6 volt battery for my 27 Ford. Does anyone know what the cranking amps are for Model T or what brand battery you recommend.

I heard of people using a modern distributor in a Model T. What modifications need to be done, and what type of distributor will I need? I'm still running coil boxes in my 27 Ford.