Search results

I am looking for a 1928_29 Ford Roadster title.Thanks Contact Lyle 903 752 6998

Ray's machine shop In Tyler,Texas. Works on Flatheads.I have seen his work. he Had a 47 with 3 duces eddelbrock heads and transmission Tricked out ready to run.I wated to long and another fellow bought it. he built it for a nother fellow and It did not have enough H/P so he traded it to Ray for...

Hay walt. There you go. See I never sleaved a flathead before. That is why it bothered me. I thought that one of you other fellows like Ol Ron might know.You are a good mechanic also.I still would not sleave it unless I had to do it.AJohn ridge reamed and lightly honed one without removing the...

I have 5 running flathead ford engines. Only one of them smokes. That one will have to be rebuilt. Maby top end only. One the 52 out of a convertable had a mercury head on one side.(driver side) ford on the other.runs like a top. Had a auto transmission behind it now has a T5.starts easy. runs...

4" better. Hope that it has one. heads are easy to find. Go with ford 52 or 53 better compression with 4" crank. The pic is a 29 the woman a 53 LOL

Hello Tom T. I have worked on a lots of different engines. I would not try a sleeve job on a flathead without a person with experence helping me. Have you miked the cylender"s and the pistons? If they are on factory tolarnces I would ridge ream.then do a slight hone to clean the cylender walls...

I am looking for a 1929 Roadster title. Contact number Is (903)752-6998.Thanks Lyle Hurst.

I forgot to tell you all. It now has a T5 transmission. And a open drive conversion.

Stock A axle, speedway disk brakes, 48 spindles. I am not using the wheels that are shown. I will post new pictures. Also I changed the rear end to a 37 ford.

I have a 29 roadster body and a 24 C cab truck body.Also have two more running Flatheads.

Here are the other Flatheads. Some of them. I have more.

I figured how to upload pics!

PS the A is my wife's car it is a 29 model the Wife is a 53 model

Hello Steve Is that with or without a gasket. One or two. It does seem odd that there is that much space. My dad use to use the gaskets (adding more for less fuel pressure) removing them for more pressure. Some of the old carburetors were pressure sensitive.I do not have a fuel pump rod pulled...

Please some one tell me If I am wrong. One bank of a flathead will not have the same cc as the other.

Because the cam is offset to one side of the block. Not in the center of the block and lined up with the crank. This makes the angle of the valves not the same on the lift and right sides. Look and you can see (with the heads off) that one side the depth around the sides of the valves are deeper...

A fellow here in Tyler is looking for a 30 31 cowl .Thanks

Ok! Google Earth I found it

It is not on the map what is it close to

How do you get there. Besides in a hurry.What highway. I got vacation in January. A long bed truck and a 25 ft low boy trailer.