Search results

  1. Mike J. CT

    49-50 ford convertible solenoid relocate adapter

    Excellent used adapter to relocate solenoid on 49-50 Ford convertibles. The X frame interferes with the normal solenoid location. Ford called these "Plate and lever assembly - trans overdrive sliding pawl operating rod". The part number is 8A-6910. Price includes shipping. I have 2 of these...
  2. Mike J. CT

    Calling all Transmission Gurus

    I have built many of these and after leaving the cluster in the bottom/side of the case, installing the input and main shaft, installing the input bearing retainer, I tip the transmission up on it's front surface. I use a work mate so the input has clearance. I lean the transmission forward so...
  3. Mike J. CT

    Overdrive using electronic ignition

    Thanks Frank, I should have searched further. Mike.
  4. Mike J. CT

    Overdrive using electronic ignition

    I recently sold 2 overdrive transmissions for cars that did not previously have overdrive. After the fact I found out that both have electronic ignition. Normally in kickdown the solenoid momentarily grounds out the ignition. How would they wire this and would a ground harm the electronic...
  5. Mike J. CT

    Calling all Transmission Gurus

    As said before this is fairly straight forward but there are a few tricks. What are the main problems that you have?
  6. Mike J. CT

    1957-1962 ford f100 hurst mystery shifter and install kit

    btt
  7. Mike J. CT

    1957-1962 ford f100 hurst mystery shifter and install kit

    btt
  8. Mike J. CT

    1957-1962 ford f100 hurst mystery shifter and install kit

    btt
  9. Mike J. CT

    1957-1962 ford f100 hurst mystery shifter and install kit

    NOS Hurst Mystery shifter and installation kit for 57-62 Ford F100/F250 pickup trucks. Pictures show complete kit with shifter, setup mounted on a dummy transmission, and slight modification needed to fit on tailhousing with countersunk holes. Shifts great. Excellent condition but knob has some...
  10. Mike J. CT

    40-48 ford mercury hurst shifter & kit

    No longer available...
  11. Mike J. CT

    40-48 ford mercury hurst shifter & kit

    btt
  12. Mike J. CT

    40-48 ford mercury hurst shifter & kit

    btt
  13. Mike J. CT

    40-48 ford mercury hurst shifter & kit

    btt
  14. Mike J. CT

    40-48 ford mercury hurst shifter & kit

    btt
  15. Mike J. CT

    40-48 ford mercury hurst shifter & kit

    btt
  16. Mike J. CT

    40-48 ford mercury hurst shifter & kit

    btt
  17. Mike J. CT

    40-48 ford mercury hurst shifter & kit

    btt
  18. Mike J. CT

    40-48 ford mercury hurst shifter & kit

    Shifter and installation kit for 40-48 Fords and 39-48 Mercurys. The Syncro/Loc shifter is reconditioned with some new parts including new Mystery stick and new knob. Some shifter parts are New CAD and others blasted and painted with metallic silver paint. The mounting bracket and shift levers...
  19. Mike J. CT

    R10 overdrive balk ring & gear.

    I bought a balk ring and gear on Ebay a while back and am unsure what it is. It was advertised as Packard R10. but is different than all of the ones I own. The dimensions are the same and a sun gear slides right in. Look at the attached picture. The normal one is on the left the one I bought is...
  20. Mike J. CT

    Were they Really this way?

    I bought a low mileage 53 2 door sedan in the late 90's. A Flathead that I put a 78 Granada 3+1 four speed overdrive behind. The fit on the fender, door, trunk and hood seams were extremely good. I removed the nose for engine compartment detailing and everything lined up well on reassembly. I...
Back
Top