Search results

No, I'm talking about the grease insert on the left of the water pump. I can't seem to upload a pic from my pc.

It's not a leakless water pump. I'll take a picture in a bit.

Hello all. I have a question concerning a leak at the water pump insert. I just recently discovered this. Does anyone here have a solution?

I eventually found out that what I thought was a new light was no good. I say that because I had a spare that I connected and the light came on immediately. I thank you all for your great advice.

No, I was testing the ground. I couldn't get a proper reading because the leads were too far from the battery.

Yes. It appears to be giving me the battery reading. I tried to use my multimeter but apparently I'm not using it correctly. I have it on the ohm settting but I don't know which setting to put it on. In either case the number doesn't change from the time I turn it on. I am clipping to the...

I tested the voltage with a test light and got from 11.9v to 12.3 on the headlight connections. The reading on the ground was also 12.3. Is the ground good or bad with such a reading? I had the alligator clip attached to the positive terminal on the battery.

Thank you both for your great advice.

The headlights have a crossover from one light to the other. I am about to do a voltage test with a multimeter.

I apologize. I do have the headlight grounded to the frame.

Here is the link to the exact switch that I bought and installed. There are four wires going to four terminals. I will still provide pictures showing the connections. https://www.dashswitches.com/products/3-position-compact-fused-headlight-switch-black-bakelite-domed-knob-series

I installed what was in the car and both lights were working. I'll have to wait until it's daylight again before I can take pictures. As soon as I can, I will upload some pictures. Thanks for the quick response.

Hello fellow members. I have a healight problem wherein one works and one doesn't. The headlights were installed new at the same time. I decided to take the switch down and noticed that the copper that holds the fuse was broken so I ordered another switch and installed the new switch that came...

Thanks guys. I tested my horn and it works. Your knowledge is greatly appreciated.

What's the name of that wire and where can buy it. I know I can get the bullet ends at almost any auto parts store.

Are those like bullet terminal connectors?

What type connectors go there?

Here are pictures of the horn insides.

Are there any horn experts in this thread?

That was a typo. I meant Sparton horn.