Search results

i need to find a hand brake for my 39 pickup, bolts to the dash and firewall. does anyone know if there are other models that will work or do i need one specific to a 39 PU. thanks in advance

i just did mine last week, wouldn't budge with a 8 lb sledge, put heat on the axle and got them started with the 8 pounder then finished with a 4 lb, it wasn't bad but you need heat or a proper puller

this post made me take a closer look at my 39 cab, my passenger door has 1/8 to 3/16 max gap and the drivers door is 1/4 to 5/16 gap front and back. huge difference and no sign of any major wrecks, could this be the way they were built?

thanks a bunch, now i know it' me that screwed up and not the parts house, i thought i had 2 rights so i ordered a new left now i have 3 lefts. great!

does the larger bore go to the front or rear brake shoe?

thanks guys, i'll check them out.

these are aftermarket and that's what i'm looking for, i dont want to deal with the pressed in originals.

first, the spring shackles pictured were in the rear of my 39 pickup, anybody know where i might get a similar set for the front axle? second is this speedometer gear any good? it looks worn to me

39 pu radiator photos, hope this works

i've never posted photo's but if you have a cell phone i could text you photo's of my 39 pickup radiator.

does anyone know where you can buy the stud for the battery cable on a flathead starter? it has a slot on the inside end where the field wires attach.

hey guys, could someone tell me the distance from the top of the rear axle to the frame on a assembled vehicle, my pickup is unassembled and i'm trying to get measurements for shocks. thanks in advance

the 2 screws on the outside is all that hold the handle on, sometimes the square shaft gets twisted from too much pressure on the handle making it hard to come out but it will come. there is a small set screw holding the lock in, you can acess that from a hole in the door edge.

i have a pair of axles from a 46 pickup, 16 tooth, 32 3/4" long, both in good shape, $30.00 each plus shipping, nitzelbarb@q.com or 406-656-2702, leave a message

i have a good set with a cross, some surface rust spots but very little wear, i would take $30.00 plus shipping. nitzelbarb@q.com or 406-656-2702, leave a message

my 39 acted the same and i found a stuck intake valve to be the problem

here' mine about a year ago, right now it's pretty much a bare frame with the cab on it.

good to see you back John, i've been waching for new updates on your 39 PU.