Search results

Emergency brake??

I may have one. The Trico box says 8 1/4 (Part No. U-778-30TM) but the blade measures 7 3/16". Send me a private message with your email and I can send you pics.

I believe if the radius ball has the rubber ball over it, it wouldn't have the springs. Look at both the kits from the vendors. The original has the springs and the rubber ball kit does not, if I remember right.

Just finished putting a 6:1 head today. Had alot of help from a couple of FB's. and Snyders. Distributor wouldn't fit easily in hole on new head. Had to use emery cloth for several minutes on the lower distributor casting (even on my spare distributor). Distributor index hole would not accept...

I stand corrected, mine was .79. Long day

I just did mine last week and both ends measured .079. Do a search on my post as it received several good replies. The 2 piece fit just fine with minor filing.

I was trying to determine if my cross shaft bushing area had any wear. The measurement on both ends of my cross shaft are .790 inches. On one end there was a bushing made of some kind of metal and a fiber lining on the inside. That bushing is not magnetic. On the other end is a solid metal...

I'm going to replace the service brake cross shaft bushings on my '31. I was wondering what the diameter of the shaft, where the bushing go, should be to safely use the standard 2 piece bronze bushing. I would want to order a repair kit the same time that I order the bushings if needed. Thank you

Thank you all for your comments.

I am thinking about replacing my 20 year old Firestone tires on my 31 coupe and looking for the latest recommendations. Tires are not worn out, just old. I would be interested to find out any of your recent experiences purchasing tires. Radials? New tubes? Thank you in advance for any advice.

Thanks for the info. Ground off top of pin and drilled about half way down pin with a 1/8" drill and punched it out the bottom. Not too bad

Are the original hinge pins on the door knurled at the top of the shaft? Tried driving one up from the bottom but no luck due to the fact that you can't get a good angle with the punch and hammer. Also tried a small air hammer. Broke the Snyders tool. If the pin is knurled it would be...

330-483-3896 is the number I've got him on

I put in 9 LED strips in my pole barn a couple of years ago and they produced excellent light, however, the radio and the cordless phone were useless due to static caused by the lights. Paid about $32 per strip if I recall. Also, have one LED can light in the basement and have noticed when...

We have been to this one several times. Great food and service and affordable prices. Several Model A's and parts on display and some of the most interesting factory pictures I've seen in one place. Our club went there last summer and had a private room and were treated extremely well. Worth...

I've been using the Wix brand for a couple of years on my 31. I haven't added or modified any gasket. There is probably a gasket between the glass bowl and the metal holder. Am I doing something incorrect? Am I not getting the gas filtered? I haven't had any gas flow problems.

I put retractable lap belts in my 31 coupe last year from info I found on Ford Barn and they turned out pretty well. PM me with your email and I'll send you what I have.

You might contact Dave Renner from Renners Corner

I looked for something awhile ago and someone said, or I read "Dupont 7 Auto Top Finish & Thickote" was what they used to use but it wasn't made anymore. I went on ebay and looked for it and there was none but they would email me if some came up. Got an email the other day that some was...

It is supposed to provide UV protection. It brightens the fabric somewhat like Armor All but doesn't seem to be as oily. But I'm looking for something to use on the edges like a seam sealer or mastic.