Search results

If you look at the video, you will see a 40 Pickup----that's what I hope to install the engine in. I have had some serious health issues for the past 4 years that have prevented any work on the truck. Maybe some day!!!

That is my engine! It's been so long since I built it, I cannot remember the exact CompCams grind---but it's the biggest one. We do have a lot of compression for the street(9.6 to 1 ) but with the amount of overlap the engine will loose some running compression----so I think we will be OK...

The only intake I know of is the Hexigon intake. They are very rare. The carbs mount backwards on the intake. I have one but I choose to just "look at it" periodically.

I am building a 40 PU also----What did the seat come out of ?

Going down the highway, listering to Hank/Hank Jr. is great------but even better when you are driving Hank Jr's formerly owned 40 Ford sedan.

My 40 sedan doesn't have a damper. It handles well with no "bump" up to 70-75 ---as fast as I want to go. I use a dropped axle with 7.5 degrees of caster. But, the steering is hard as low speeds and as I get older---it gets more trouble to steer. I have been pondering reducing the caster angle...

This is sort of "on the subject". Coating of bearings (and other parts as well) is very standard today. There are companies that coat bearings OR you can coat them yourself with the right equipment. The typical moly coating on a bearing is .0005" thick for each bearing shell or .001" for both...

I have a split core radiator in my shop. Thirty years ago, both cores were replaced and the tanks are original. The radiator is essentially new. The only usage was to run in an engine about 28 years ago. It was drained then and been kept in the dry since then. If you want it, the price is $300...

You have cars that look good at 50 feet, closer than that the flaws show. Then you have car that look good at 5 feet---they are worth far more than the 50 footers. Finally, you have the cars that look good "all the way". Those become the reeally "high dollar" cars.

I am 70 yrs young! My body feels much older but my mind is only 20. I have been surprised and pleased at the younger barners.

I am ready to purchase the wood/stainless trim for my 1940 PU. Who is the best supplier(quality wise) for this kit? Thanks is advance!

A couple of other questions that I did not answer: Yes, the heads, intake and gear cover is powder coated. I am getting too old to polish on aluminum or chrome. I think I will powder coat(black) the air cleaners. The pistons and heads are ceramic coated. We have used this in the past on...

I appreciate everyone's comment. Now for some specs: 1950 Merc block 3.3125" X 4.00" Comp Cams "Muther Thumper" cam Aluminum timing gear stock rods, shotpeened, rebushed, resized Intake runners enlarged, polished Lots of work on the "hump" in the intake runner Exhaust is cleaned up, edges...

I finally got my engine together and it is NOW running. My son is really the assembler----for who I am truly blessed. One of my goals was to build the meanest sounding flathead around, and I think we have met the goal. If you want to view it, go to: http://youtu.be/oPp-DfDRYX8

I am considering using a Vega box on my 40 ford pickup. Some say the Vega box is too light to handle the weight of a pickup. Any opinions? My truck should weigh about 2700 lbs, not much more than a 34 coupe.

A friend wants to remove his mechanical fuel pump and use an electric pump. The engine is a 59AB. My question is: Does anything need to be done to plug the fuel pump pushrod opening in the block? I know on a 8BA the bushing has a oiling hole in it. Is the 59AB the same?

I used a pair of 65 289 exhaust manifolds. It is helpful if you can raise the engine about 1". The exhaust pipe will need to be only 1.5" in diameter. Or even better if you can oval shape the exhaust pipe. I ended building a set of stainless headers during my rebuild of the car----that solve...

We want to come---if possible. Along with me will be several others, none flathead powered, but still interesting.

I have a friend with a fresh 59AB engine. He wants to use the later style 8BA front cover and distributor. The engine will go in a 34 Ford. What water pumps does he use OR what crank pulley does he use?

We would really like some photos of the engine-----and some info on the internals!!!!!