Search results

I make reproduction Battery Horns for 1922-1927 Model T. The magneto horn started to appear on a few of the 1915 Model T but then was around for the entire production run through 1927 since the electric car with starter was an optional package. The electric car started in 1919 but the battery...

Actually not so great of an idea. Most of the problems with getting proper clearance around timer rod is that people don't know that to properly set the timing and Not have it rub against anything is to start with a brand new rod properly made to factory drawing. Yes they do exist. To adjust...

Thanks for the kind words guys. My web site was down for a few weeks so thought I would make the rounds to see if any fires started burning while I was down ha ha. Best regards. John Regan

www.funprojects.com/products/AFK-1.aspx You need a sealed fuse holder since the mounting is right where water and dirt can enter the car as you drive or wash the car. The ammeter does not contain a fuse and may or may not burn up before the wiring does. Systems are fused at 25% more than the...

I restored a 1912 Delivery Car (a really rare original artifact) so I sent samples of the various body wood parts to the US Forestry service. They had a service that allowed the public to send up to 5 samples for analysis. They needed only a piece 1/4" x 1/4" x 1/2" which they would burn and...

It appears the one of the top sockets is missing on the left side of your picture. There should be 3 on each side with wooden bows spanning the distance across the top.

Please be advised that many battery chargers assume that the load you place on it will be a battery and nothing but a battery. Connecting a battery to an ignition coil risks destroying the rectifiers or other circuitry in the charger. I have a battery charger sent to me that died when the guy...

We have the plans to build your own. www.funprojects.com/products/pub-1.cfm

To operate a 6v device you need to get a voltage dropping resistor that drops 6V off so that you have 6V left. If the shop said 1.5 ohms is correct then it would mean that the wiper motor is drawing 6/1.5= 4 amps. The wattage on that resistor would be dissipating (P=E*I) then 6*4=24 watts...

You were one of the easiest people to help and you had a problem that typically is hard to prove out especially over the phone. It is rare to find someone who is willing to listen and cooperate and you located one of the more difficult problems pretty much by yourself by collecting accurate...

I need an automotive Toe in scuff gauge machine transported from Atlanta, GA to St. Charles, IL or nearby. The machine is basically long, narrow, and flat so could easily slip under any car being transported at the same time. The flat part on the floor is 10-1/2 foot long x 28" wide x 2" tall...

I need an automotive Toe in scuff gauge machine transported from Atlanta, GA to St. Charles, IL or nearby. The machine is basically long, narrow, and flat so could easily slip under any car being transported at the same time. The flat part on the floor is 10-1/2 foot long x 28" wide x 2" tall...

I need an automotive Toe in scuff gauge machine transported from Atlanta, GA to St. Charles, IL or nearby. The machine is basically long, narrow, and flat so could easily slip under any car being transported at the same time. The flat part on the floor is 10-1/2 foot long x 28" wide x 2" tall...