Search results

Thanks guys, all make sense

I am curious if anyone has seen a Model A water pump failure where the housing has snapped by the bottom 2 bolts. Damage has caused a fan blade to detach and the pump smashing into the radiator. Not my car, but I have not heard of this before Any comments would be appreciated Many thanks in...

https://cwmoss.com/products/rear-axle-repair-sleeve-1932-48-ford-passenger-1932-47-pickup

I am glad you made it home safely. a well deserved Longest Distance trophy It was great to catch up at the Nationals.

Have a safe trip, I will be there also.

Looking for a good 1958 Ford Custom RHS tail light bezel, The Chrome metal piece that the tail light lens mounts to. PM me with a few images if you have one available I am in Australia but my son lives in Idaho Thanks in advance Graham Bilsborow Adelaide Australia

for the 9" rated 60HP less 12% to turn the 9" don't leave much less another 25% for the auto

Re: Need ‘35 horn parts I rebuilt my 33 horn by retrofitting the internals out of new 12v bull horn, some modification required to the mechanical operation. The perimeter mounting holes exactly line up and the cover will fit...

I have a 33 5 window coupe. after studying all sorts of things to do with the Model 40, and by no means claim to be an expert or even an authority on early Fords and in particular the Model 40. I believe due to the lateness of the introduction in 1933, the Model 40 effectively evolved to...

Looking for 5 off 1934 car dash knobs. Not fussed what wording is on them. Let me know what you have available many thanks Graham

I recently repaired my banjo, sanded the bakelite, kept the dust and used super glue and the dust as a filler, this was for cracks no bigger than 3/32" wide, it went really well with a build up would probably fill a an 1/8"

Looking for a nice pair of original 1933 car hood handles pm me with photos and cost cheers

-ve ground or +ve ground ? if -ve ground, you may need to check your coil wiring

chasing a couple of small things to complete my build 1. a 33 or 34 Fuel gage, need a nice one ( Obtained ) 2, a pair of original 33 hood handles, ok to have a couple of small marks but would prefer them to be nice with nice nickle coating pm me with pictures and cost thanks in advance

on a different subject, The Grille and Cowl welting for the Hood, in the image above it shows a channel in the middle and the colour is sandy beige, does any one have a source for this material, I have the vintique stuff but it does not have the channel and is a very dark brown thanks in advance...

my wife has a 2017 4 cyl Mustang, 320HP drives really well and plenty of oomph, only thing is it sounds ordinary,

I have adapted a Tremec TR5050 6 speed gearbox to a 33' B Engine, took a bit of effort, I have not driven the car yet but have plumbed the hydraulic clutch and it disengages the the clutch plate, so with crossed fingers it should all work OK, at this stage test drive will be end of June

Well how time flies, after lots of side tracks I am in the final stages of getting the 33 finished, I finished assembling the engine and is now ready for installation into the chassis, I completed most of the body work six weeks ago, and considering what I started with I am pretty happy with how...

Re: Where’s my water going? 7ib cap is more than likely max for a stock radiator with stock upper and lower tanks. for every 1lb of pressure you increase the boiling point of water by 3 degrees. So with a 4lb cap your actual boiling point is 224 degrees, so you are on the cusp of this temp once...

I had a 63 1/2 500XL Galaxie 352 Cruisomatic, the vin number stamped on the tab on the RHS cowl, had been xxxx out and replaced with the new number, the xxxx out number indicated a 390, this was done on the production line. Car was an LA car, from memory Reseda CA