Search results

Many of the after market 1931 style dash lamps may short out. Mine did, without even using it on a sunny day going to a show. I have a fuse installed and it blew, OK, had a spare and off I went after disconnecting the lamp wire. I bought an original lamp that only needed light cleaning and a new...

I thought the same thing until someone told me only some high compression engines need Zinc. Model A's are low compression.

I couldn't have worded it better Marshall. My thoughts exactly.

I can feel the snow flakes hitting my face now. Did you notice the car is driving in reverse? Must be a driveway.

My front crankshaft seal is leaking so bad, I pity anyone driving too close behind me.

ursus is correct. My '31 came with '35 wires on it many years ago. No problems at all, direct fit.

My old pickup came to me with an early, store-bought battery holder for the firewall. Possibly the 1940's? I have many other irons in the fire, so I left it there and it IS way handy. I ran two new "00" gauge black cables, one to ground on water inlet bolt & other to starter. There is no...

Re: Heat in a model ‘A’ options I am fortunate to have an original Autolite manifold heater in the old pickup. It sure comes into great use for those early Spring and late Fall car meets. I don't see how the aluminum wire-on manifold covers that are sold new today can work as well though. I...

I used an old brake rod, cut off a foot or so from the eyelet end and bent to fit around the axle. I made a small open cut in the eyelet to engage the spring end. A one-handed pull and Voila! easy peasy. a large screwdriver in your other hand helps to set spring onto the brake arm. Still can't...

If you think it's "no spark", check if a fuse blew or a bad contact with a fuse holder. I had the same effects once. It was a bad dash light socket and blew fuse which killed ignition.

I adjust my brakes similar to above posts, but I have the rears grab first.

I've running a Pertronix Flamethrower 6 V. coil for several years with no problems anywhere in my spark circuit. If money were no object, I would like to hacksaw an epoxy coil open to see if the epoxy is a solid rock or softer material adhered to the windings. If the epoxy cracks away from the...

Try disconnecting your instrument panel light. The repro's switch was shorting out. This happened to me. I don't have much of any repro parts on this old truck. Either the stoplight switch or the map light, after that short was found in the light, I replaced with an original that was worthy of...

Did anyone notice the "Devil" radiator ornament on the roadster behind them? I thought for years the repro Devil giving the "thumb to the nose" ornaments were a thing of recent imagination. I guess not.

Most likely the wood parts will need to be taken out piece by piece as I remember. There is lots of machine screws with square nuts holding the pieces in the perimeter wood and those screws may need to be cut off. Take plenty of pictures as you go.

Thanks for the video Paul. I enjoyed the restored and the unrestored in his collection.

Until you find a better block, you could use "K-Seal", a small container of stop leak for a leak like yours. Two years ago at a car meet, a friend had a bad leak in his '62 caddy radiator. I mean really bad, a green river from his car, running about 10 feet down to a drain. He wouldn't of made...

Scotty Kilmer had a lot to say about the Optima batteries on his YouTube site. take it for what you want to get out of it.

I was under the impression they were coated with a type of blacking, that wasn't too permanent also.

I miss them too...