Search results

  1. C

    59AB Going into my '33 Truck, Generator Question

    I have the correct fan, if you need one. Thanks
  2. C

    Identify Brake Backing Plate

    I have backing plates stamped FoMoCo and Bendix 3071 76. Does anyone know what these fit? Thanks
  3. C

    '32 headlight bar

    I have a ‘32 Commercial Headlight Bar that I would sell, if interested? Thanks
  4. C

    ‘39 Standard Generator to 12V

    ‘39 Standard Generator to 12V In converting a ‘39 Standard Generator to 12 Volts, what is the correct 12V Field Coils to use? Thanks So Much.
  5. C

    1940 Ford fuel gauge issue

    I’m running 12 volts in a’40 with original gas gauge with a Ron Francis VR-1 reducer and a Bob Drake sending unit. The original gauge reads perfectly.
  6. C

    Mallory Unilite

    This is the new Mallory Unilite for a 59a motor. Has anyone used this distributor, and what is this threaded hole in the top of the body of the distributor for in the above picture? Thanks
  7. C

    Flathead Engine Builder

    I would highly recommend Ken/Alabama!
  8. C

    32BB truck parts needed

    Sent you a PM Thanks
  9. C

    1940 Ford open car rear window frame

    Sent you a PM
  10. C

    '32 Ignition Lock Cylinder Removal

    Phil, Thanks so much for your help. I have restored several of these column drops and have always removed the lock cylinder first in order to remove the shaft. I will try tapping. This cylinder is really frozen!
  11. C

    '32 Ignition Lock Cylinder Removal

    Will try the Patience and Persistence Method !!! Thanks for all your help.
  12. C

    '32 Ignition Lock Cylinder Removal

  13. C

    '32 Ignition Lock Cylinder Removal

    David, in the past, I have always been able to remove the Lock Cylinder and then remove the Steering Lock Barrel. Can the Steering Lock Barrel be removed with the Lock Cylinder in place? Thanks
  14. C

    '32 Ignition Lock Cylinder Removal

    I am restoring a '32 Column Drop and having trouble trying to remove the Ignition Lock Cylinder from the Column Drop. The pin has been drilled out and has been soaking in PB Blaster for a couple of days. The key is in, but unable to turn cylinder and pull out. Any help on how to get Cylinder...
  15. C

    Third Gen Auto

    Well said ALmotorman !! I was there yesterday and Michael is a amazing young man, who is indeed, extremely knowledgeable, and he and his wife run a First Class Business !!
  16. C

    Bob Drake '40 Gas Tank

    Does the Drake Gas Tank for a 1940 now fit the same as a original? Thanks
  17. C

    Stromberg S-jet

    I have 4 new Stromberg 97 carbs with the S-jet Fuel Inlets and all 4 S-jets stick. These are on two different 8ba motors with 2x2 intakes and electric fuel pumps. After sitting for several weeks, the S-jets are stuck closed and cannot get fuel to Carb. Have to remove and blow out with air to get...
  18. C

    Roy Nacewicz's business, and it's future

    Thank you Michael !!!
  19. C

    Hydraulic Brake conversion on a 34, where can one get the Kit?

    Richard and Dennis Lacy of the early v8 garage are the BEST in the business with not only their parts, but also their knowledge and support.
  20. C

    Shout out to Ken/Alabama

    Kenny is a GREAT GUY !!!!
Back
Top