Search results

Hi, i´m desperatly looking for a door latch for a 1946 Delivery, the rear door, any one, please? /Tom

Hi guys, i´m looking for a complete rear door latch for a 1946 Ford Delivery. /Tom

Thanks racemo, i will soon post some pics of my project :)

I'm going to do some hot riveting today and have all necessary items but can't remember how much the rivet shall stand out, to build a perfect head. I believe it's 1,5 x diameter but i'm not sure. Please guide me. /Tom

Here is a traditional solution. Hand primer pump and a vintage low pressure gauge. http://www.ebay.com/itm/Fuel-pressure-pump-SCTA-hot-rod-Vintage-race-car-/130648885381?pt=Vintage_Car_Truck_Parts_Accessories&vxp=mtr&hash=item1e6b47c885...

Which connecting rod suites a 30-31 column best, as a column drop? What do You use?

VwJoe, You are my hero!!!!! Darn..that was easy with Your method. It sat hard but came loose in a couple of minutes. And NO.. someone before me made the cracks using a worse method.

"First, remove the horn button/shaft. Remove the nut (you done this already). You should see (4) blind indentions around the shaft. Pick (2) 180 degrees apart and drill a 17/64" hole in each all the way thru. Thread each hole for a 5/16" NC bolt. Use a standard bar-type steering wheel puller...

Thanks a lot guys, i really appreciate Your help. Good link. /Tom

Sorry.. forgot to say it's a 30-31.

Will the upper cover at the spark and gas rods, go down, when i loosen the screw, or up, when i pull the steering wheel, with the steering wheel puller that i don't have... yet. I have tried to tapp carefully with a bronz hammer on shaft/nut but nothing. Warming perhaps? Are there any easy ways...

Found a pair! /Tom

I use a 26-27 vaporizer intake upside down with a home made connection to the Tillotson X carb. Runs perfect!

Hi all, i'm looking for a LH drivers side 1926-27 spindle. Good threads, good bearing surface and not pitted. Hope I have not scared away all now. /Tom

This is how i did it. Now i only have to figure out how to steer it when driving. Bent steering arms, bent tie rod or both. Model A arms and model A steering box with the drag link.. rather not. How did they do it before the model A showed up? I would like to have it period correct as possible. /Tom

I hope that You maybe have some good advice for me. I have lowered my -23 roadster 6" rear and 8" front and i'm very satisfied with the stance. What do You prefere, heat and bend the steering arms to clear Z bracket i made or use model A arms instead. Or make a bend on the tie rod. How did they...

I have tried several different modern 14mm plugs with an adaptor in my jalopy, even the Champion 25's and she run undoubdedly the best with the original Champion X's. They are expensive but if You buy quality, You only cry once. :-)

Stevests, thanx a lot for You reply.

I wonder if the model A's left and right steering arms will fit in the model T ones? Are the holes the same diameter?

Well i see.. now i understand why my car runs like a camel.. the tires are Firestone 4.50-5.00x19 and the rims says Hayes. Thanks for Your reply, Layden B. This is my wheels.