Search results

Tractor Supply Ez-Slide works great, just use gloves, it's hard to wash off.

While installing studs I put antiseize on them and the oil worked past some of the nuts.

Permatex Permashield Gasket Dressing & Sealant works well. It does not harden and the hose is easy to remove at a later date. It is also fuel resistant.

Have a 30 Roadster and had to raise the front so the pulley would clear the cross member.

I use Prematex Permashield gasket dressing and sealant, it is fuel resistant. Another good product is EZ Turn which is fuel resistant and is used on aircraft fuel fittings. I have used this on the gas shut off valve (easy to turn and seals the threads on the fittings.) EZ Turn cost me about...

Shell Valvato is now Shell Omala S1 W 680 and Texaco Meropa is now Chevron Meropa 680

Look at Model A Ford Club of America, Tech Q&A lubrication. Shell Valvato or Texaco Meropa 680. Agree also on Shell Omala.

Most people were not as tall in the past as they are now. The first Texas Penitentiary built in Huntsville Texas in 1849 (The Walls Unit) has some of the original building inside the walls. The cells were open to the outside with no protection from the elements. The cell doors and bed are only...

I had the same problem. The key was sliding back and prevented the hub from going on all the way.

Looks like a grommet

I was told if you use a wood box you need to put cardboard around it, if you don't you will pay more for the exposed wood box. Go figure

CRC brake lube works very well.

Try EZ Turn to seal and to lube the valve. I have used it and the valve turns easy and does not leak. I have also used it on oil lines with no leaks. I read it is used by Rolls as a back up to the o rings to seal the fuel lines on their jet engines. Got it from Sky Geek.

I will be building my floor for my 30 roadster. I will use cardboard and make a pattern. I would suggest whatever plywood you use make sure the outside layer is not paper thick as most cabinet plywood is now days. I have some fur plywood that the outside layers about 3/32" or more thick. I...

One of your starter bolts may be to long and if it is it will hit the flywheel. When I took my engine apart I found marks on the front of my flywheel from a long bold that someone used.