Search results

I have a complete and working Southwind Heater used with the Stromberg carbs. I advertised this unit and got no response. One more try. Call and make an offer. 207 944 3128. Jim.

Hi folks. I have a 79 302 ford with a 4bbl edelbrock and edelbrock performer intake. I found that using lighter springs in the distributor and no vac advance gives max power with 32.5 dwell at 3 grand RPMs. My question IS... What type headers would I use for more power??? This was a Ford crate...

The motor has 8500 miles on it. 7200 when i got it. I got the timing fixed. The distributor was not grounding to the block. Cleaned the tie down bolt and holder and that fixed the problem. Found it with an ohm meter. It has a edelbrock 4bbl and dual plane edelbrock performer manifold. Dual 2...

Yes this is the engine. And I did get it timed.

I am also ol' Geezer

Picture of tag from crate

What have I got? This came in my 55 F-100. I have no clue. It has an Edlelbrock 4bbl and manifold and dual exhaust. I'll enclose a picture of the crate tag. Thank You again for your help.

84 FMC short block 5.0L. Edelbrock dual plane 4bbl aluminum performer intake with Edelbrock 4bbl carb. New standard ford dizzy.

What is the best method for timing my 5.0L 4v carburetor V8. Do I use the vacuum above or below the throttle plates?

I have always used Muiratic acid. The new stuff will not burn flesh but will clean rust really well. I use a couple gallons mixed with 20% water. plug the tank and turn every 12 hours until the inside is totally covered. Then empty into plastic container. The in side always looks like new...

I have a complete and working Southwind heater and many spare parts. Yes it has the carb pickup that is so hard to find. This worked great in my 37 Ford pickup. I even have a correct 12V to 6volt reducer if needed.I gave the truck to my son in Virginia who didn't need a heater. Please call me at...

Hi folks. Helping a friend find replacement rear brake drums for his 1949 Mercurt 2 door sedan. What all fits? Thank you, Jim.

Yes it's 5 on 4.5"

Thank you all very much. I'm buying new wheels that fit. Much safer.

Steel chromed wheels.

I have 2 never mounted smooth tire no tread design all white tires for sale. Also I have 2 excellent no lug rims for sale. Sold my T project and am not going to use.Call Jim at 207 944 3128 anytime. Any fair offer accepted. I can text pictures. I'm not giving them away but I would like to...

I have 2 UCRL06 as advertised in the link. Very good condition. Call me at 207 944 3128, Jim

I am wondering if I can replace my TT differential with a regular T differential? I'm not hauling any load but would like more road speed. Any ideas?

I had the same problem and it drove me crazy. Turns out i had plugged fuel feeds to the idle jets. No high pressure air will blow it out unless you take the carb off and leaving the jets in but backed out a couple turns high pressure air might work. It did for me. Another time i revved the motor...

1957 ford dizzy works very well with edelbrock carbs. Use the diver side vacuum port on the front of the carb. I believe that is direct manifold vac below the butterflies. What a great improvement. You cannot use the 56 dizzy.