Search results

Looking for a 4:56.1 ring and pinion gear set for a model a ford

Looking for a 4:56.1 ring and pinion gear set for a model a ford banjo rear end

thank you all again for the info

where did you get the spacer gasket I also have a Winfield red head that I will be putting on a motor that I plan to build in the future

pistons stretch with heat iron stretches when heated don't know at what rate but I needs clearance regardless.

the head I have is aluminum so I took the head gasket and a scribe marked over pistons then took a sharpie then got my router and a carbide tip bit and removed the material and with a 90 degree die grinder polished with good results checking with feeler gauge and straight edge.

yes I have I have a 2 port riley that I have had to 5500 repeatly

thank all of you for the info

I have a rebuilt motor with pistons that come 0.20 over the top deck and a best gasket with a 0.42 compressed thickness will this work with a Winfield head with no relief cut over the pistons the rods will stretch at high rpm .