Search results

well it goes like this as a boy my mother was an artist =? are all tuxedo cats black and white ? she said come with me, grabbed Richard, went out side,his black & plop"d him in the snow his black coat had a touch of brick red and back inside he turned black again ther ya go

what has to happen remove the carb. remove the top is there any gas in fuel bowl next fill bowl with gas till the float valve is close,ed and put the carb. on a container. then go to bed lol now we will see if the power valve is wet .if so you should smell the dipstick. It has been said it...

Sounds like a no power problem, so be advised that power comes from the directional switch /system usually a brown wire (because you have a two light system) its like this lets say left blinker is flashing and the right stop light is on steady Not saying its the hydraulic switch which has to...

Never forgot 1970 going to work from the corner of my eye a boy on a bike hit the brakes and all four locked up this is a 1936 four door that's proof. WE run a shop do You want to see barrels of brake lines, rotor's calipers scrap. that's why I hate juice brake. by the way it is still in my...

Simple test remove a spark plug put any wire on it turn over engine with crank till a good spark spears note which coil is working next wire which coil good spark take note same thing with the two others. You are watching for a crisp blue spark if any one shows a weak yellow or no spark thats...

All I can say is I LOVE my two lathes

looks like you are going for electric pump? If so I would get the correct bushing and pump rod back in. This way it will do its oil thing. the rod only moves a little and will make no noise. the proof is one of my trucks having a 337 has been running like that for 10 years (with electric pump)...

The only way I do it is remove the speaker grille and there it is now you can remove the control & remove the motor for a good cleaning and oiling.after that test it with a hose to the engine vacuum and run it ___remove small cover for more lube

Sweet ANOTHER SAVED from the race track 42 thru 1948 coups ,most wanted for racing.......

thats an old term we use to say what it means is by a 1/2 lap the 8BA fell back almost 3/4 a lap. another term left him in the dust. good ole days

Pretty near almost :0: Just enough to turn freely..........

I wonder about these cars of today mufflers seem very quiet how about using it.

All I can say is in my day of oval track class A division 100% was Ford and 100% were 59ABs. I remember only one 8BA that was at the tail end and went to pole position and the flag came down the 8BAs and smoked him. I was one of four on the pit crew and I can not remember anyone losing an...

the bolt next to the block

Yes leave Bat wire there and connect ARM wire onto it (BAT). ARM wire connects to ALT This is because on the reg that Bat terminal is the feed and this feed goes thru the Amp gauge loop which feeds the system. I have always called a loop style Amp meter a induction type gauge used on Ford...

most run of the Neg. side of the coil............

I assume the Alt. is a one wire unit if so #1 leave existing wires there 2 connect the armature fat wire to alt 3 go to original voltage regulator remove that ARM wire and connect to BAT terminal 4 some alternators have isolated ground terminal so connect a wire from that to a nut on carburetor...

Chrysler prod. was famous for odd bearings too. Also Fred is the man!

my 59 AB when I put 4 qts stick reads full. another qt reads over full mark. (no filter) I go around the block now it reads full. engine has only 10,000 miles . no sluge it was thermo baked came back pure cast as new. I also have couple F6's 5 qts my F8 337 0 qts. so I say 5 quarts from 59A...

I have never a problem using a floor jack, raising the car to the point of no weight on the axle wheels off the ground and bang the shackle out you may have to jack axle up or down for the correct shackle. I never yet used a spreader used porta - power nope. So simple just relieve spring...