Search results

Thanks for the suggestions and help!

I used a 1930-31 Briggs Sedan latch by adding about 1/2 inch to three sides of the latch to create a surface mount latch.

I need help for a friend that is trying to restore a pickup bed, mixing new parts with old. Does anyone out there know the locations of the spot welds? Or any information that will put him the right direction?

Looking for rear bumper clamps with Ford Script as used on early '28 please contact if you have any available for sale. Thank you. Bill H.

I want to purchase these parts, how do I get a hold of you to do so? Call me or Email me at WHuminski@cfl.rr.com Thanks,

Could you please call me regarding the door handles? I have a question to ask about one of them. Thanks, my number is 321.454.4490 Bill H.

My friend just purchased a Flathead V8 that the previous owner, an older gentleman, could not confirm which year for sure. It is missing some parts like the flywheel/ clutch pressure assy and housing for same, along with the starter. His question is how to tell the engine and year? The block is...

I am about to committ to buying new tires and tubes (21") for my Woody, but I have heard from a couple of people problems with the new tubes (non-US) having leakage problems. It is reported that they lose 7 to 10 lbs. pressure in a week's time. Has anyone had similiar problems recently? Are...

I am interested in the springs. I plan on using them for a different application so I need the measurements. Could you please check the sizes for the top and bottom for length, width and thickness? Call me at 321.454.4490 or email me at whuminski@cfl.rr.com Thanks, Bill H.

Hi Vanspeed, I have a friend here in Florida who has the cab corners you may be looking for. If you are interested he wants $150. for the pair. If you give your email or call me at 321.454.4490 I can send pictures of them. They came off a Ohio CCPU that he is modifying with 6" extension corners...

Thanks to everyone who inputed to this thread. I forgot about the fender differences in 1930 versus 1931 but not having been around back then who knew. Interesting thought though about someone writing an article about how Ford used many parts both before and after their time to keep the line...

I have a friend who purchased a CCPU in West Virginia recently that the widow who sold it said it was a 1930. The body however is a 1929. The date on the frame puts it as April 1930, however I thought the '29 was made until June of 1930. It has 1930 fenders and radiator splash aprons and the gas...

No offense taken, you're right I got it apart, I should be able to put it together. I am located on the East coast of Florida, the nearest club I know about is about 75 miles from me. There are a couple of Model A 'ers nearby and I lean on them for help. As you say not many people have gone into...

Thank you to all that answered by request. After reading the tech article it appears to me that, 1. I am way over my head. and 2. That I do not have the tooling required to do the work. I am going to either find someone local for help with the tooling or locate another rear end to use instead...

What started as a attempt to replace the axle seals on my rear end has mushroomed into something more. It is a "donor" rear end that I traded some parts for with 48K miles on it of unknown condition. After I removed the driver's side axle half, I discovered the driver's side differential housing...

Hi, Would you consider removing the door latch mechanisms from four Briggs body sedan doors, fronts and rears, so I can use them on my woodie project. I can send you a picture of what I need. Call me at 321.454.4490 Regards, Bill H.

Hi, We restarting the old "MoonPort" Chapter of the MAFCA on Merritt Island and would like you to consider joining up with us. We have had a couple of meetings and are just reorganizing. You can contact either Dave Bobbitt, at bobbitt.rebecca@gmail.com or myself at whuminski@cfl.rr.com my number...

Can you post pictures or email me them of the drums and backing plates, and yes what is the thickness of the drum material.I may be able to have them picked up locally. Thanks, Bill H. 321.454.4490 whuminski@cfl.rr.com

Hi, You're refering to the "wishbone" that attaches from the center rear of the flywheel housing to the spring perches? Check out ebay there were a couple of them(about $100.) on this past couple of days. I have one which is not that bad condition was saving it for backup. It is straight, just a...

Hi, I think I can help, there is an offset of about a 1/4" on the "Z" bars. This also makes the rails of the floor supports and the floor itself to adjust for this offset. If you would like some information about the "Z" bars or drawings, I would be happy to help. You can call me on the East...