Search results

Caution: (The following is intended to be humorous) I once had an old Dutch mechanic tell me the clearence should be; "loose mit no slop" Sort of a "mechanics tight" type of measurement! Brian W.

New exhaust manifold..use the rings. Old manifold..maybe not. Particularly if it has been milled, etc. The engine block side will be deep enough, old manifold, maybe not. Brian W.

The oil pump is a simple displacement pump...not a pressure pump. Only lifts oil about 6 inches. If the gears fit well and not bind, I would think all should be good? Brian W.

:)Junk in my opinion. why put it back in? Its wore out. So, i put it back and now have a rebuilt trans? Well i took it apart and put it back together...doesnt that mean its rebuilt? Brian W.

What Bob said in #4 above. Brian W.

I donno if you can get a "good" Tudor for $8,000. If the car has truly been gone over and is a solid and safe "driver" with good engine, correct paint...well then ....also a good set of working set of Stipe shocks....well how about $13,000 to start the conversation!

Yeah, some folks just dont know...not aware or even worldly, out side of their own little world of limited experience, knowledge, and education, or lack thereof. Just my observations. Brian W.

Please no more posts about straight weight...non detergent oil...if its detergent then O.K. Dont overfill the pan. Only asking for leaks. Brian W.

Yes, cutout or alternator...depending on what your running. My 2 cents. Brian W.

add the acid to the water...not the opposite. Brian W.

Bergs for me. Six years and still perfect. Brian W.

Blackwalls is my vote, IF and only if, I had purchased say, a roadster (deluxe) that had them I would run them till they wore out - then replace with blackies. A deluxe roadster with dual sidemounts would be perhaps the only A that in my opinion looks alright with W/W tires.

Well first thing I'd check is make sure you have good fuel flow from the tank, through the pump, etc. I'm thinking the pump could be bad, needing a rebuild. Could be a big vaccum leak on the intake but try the fuel stuff first. Also, check your points gap. Brian W.

No oil passages in the head or on top of the block. Likely (IF) you have a problem it's going to be a ring problem or possibly worn/loose intake valve guide IMO. Do like others have said and just run it awhile and then recheck to see if actual oil is present. If so, could use a hotter plug till...

Well then, Jet-Hot it will be. Thanks for the testimonials and real world experience! Brian

Anybody try one of the high-tech manifold coatings? If so, what has been your experience. Not talking here about fizz can paint jobs with barbecue paint, just the specialty shops, like Jet Coat, Cerama-Kote, etc. Brian

Lubri-plate SPO-288 is really a great product for the transmission. Brian

I'd say OFFER around $3,000 to start the conversation. Maybe more but I'd have to see it. Brian

If youve never had good,not rusty, springs and good original, or stipe shocks , then you'll never know. Too many used to driving without any shocks and just have come to expect the car to " be like that". No experience with the tube shocks here so I can't say...but likely better than nothing. Brian

Beet juice. Check it out. Nrian