Search results

I have a set of bug eyes pm me

If that's the swap that utilizes a AA bell housing ( 6 bolt and 1 inch shorter than a car bell housing ) I have one to sell

thats always worked for me :cool:

If thats the case how hard do you have to push could be sticking or does your float ....float... or can you here swooshing inside ...it might be sinking those are the only two things that can be going on

I have no tires for my 29 (21inch ) so if anyone's not happy with what they have Ill take them....not very concerned at this point

I would have to agree with Tom,If its turning more to one side or another chances are its an issue with the front end geometry.....weather its off or you have something bent

:cool:Thats whats nice about this site and the people on it

mine had a 4 blade on it and the key way on the water-pump was hogged out from it

I made all my exhaust and put the pipe up inside ..still had a whisper of a leak and cut down a peice of muffler wrap and put in flange quiet as a mouse now

pancakes and old iron two of my favs ..but not on the road yet and a little far ...look forward to some pics:cool:

weekend bump to top:cool:

Its amazing how many shades and different colors there are ...and to some people that don't paint or see a lot of it don't realize some of the subtle differences ....I had people tell me well just paint it blue or red or white and there are hundreds of shades let alone the difference in hues

Sorry for your loss Bill

I got a switch for a ford 8n tractor and except for having to unsolder the wires on it and drill and thread the holes to accept oem tabs on harness its nice and short and the nut to tighten it is on the back .Fits the opening on the dash very well and looks good also. Got it off ebay shipped for...

I got a switch for a ford 8n tractor and except for having to unsolder the wires on it and drill and thread the holes to accept oem tabs on harness its nice and short and the nut to tighten it is on the back .Fits the opening on the dash very well and looks good also:cool:

I always crank mine first to see if it will lite ....then and only then do I pull the choke out

I have a nice pair of 1931 4door running boards that I would like to trade for a set for a 1929 sport coupe,These aRE NICE BOARDS WITH THE STEP PLATES :cool:

you need to cut the float down to fit ....Then I made a cage of light wire to insure the float and clip stays on

:cool:OL yeller ...I would just get the car and build it then ...check with dmv they might want you to do a pencil rub over ID # on frame and body and have a pic of it too..document anything you can ..when done will have to be checked over by hw patrol and then issued a number...A call to the...

If the vertical part your talking about is the front door jamb and windshield post then yes it bolts on ...the gas tank is bolted to the cowl and the whole works is bolted to the post AS my avitar shows no cowl or tank standing on windshield posts