Search results

Looking for one 1940 front hub, that the drum mounts over the hub. Please let me know what you have. Thanks,

In need of one front hub, please let me know if you have one you're willing to part with.

Appreciate the info guys, Terry, that was pretty much what I was looking for.

So I can assume one of two things here, either I should not have taken apart the spider gears, or no one else has done it and doesn't know the factory torque specs? I've looked through all the literature I have and do no see anything, and any internet search only brings up the axle nut torque...

I have looked around and can't find it, is there a specific torque the bolts that hold the spider gear cradle together? Can't find it so thought I would ask. I assume it may be just a case of tighten the nuts till they are tight then go to the next slot in the crown, but thought I would ask...

Sorry should have explained better, the angle of the front frame section in relation to the centre line of the frame. I want to make a Model A style flange for wellding to an F1 steering box, couldn't find what I was looking for specifically. Most of the flanges I've seen are just made 1/16"...

I've been looking around, does anyone know what the actual angle in degrees is for the front frame rail section on a Model A? I can find the dimensions and such, but with no exact dimensions in relation to each other, ie holes at the center of the frame rail, I can't calculate the actual angle...

Looking for a Clutch Equalizer Shaft Part# 51A-7503. Let me know what you have and what you want for it. Cheers!

Looking for the leaf lengths for a Model A 10 Leaf Front Spring. I had picked up a front spring a while ago, and it has a few extra leafs added in, 13 in total. Just want to confirm what the correct 10 are, there are 2 pairs that are almost identical lengths, so I know one of each should be...

Looking for a Model T Rear Spring, specifically a 26 or 27. Should be a 7 or 8 leaf. If you have one, please let me know. I have two already and both have cracked main leafs, so hopefully one that isnt cracked. Thanks,

Looking for emergency brake parts for a '40 rear end. Looking for everything, for some reason my rear end had no emerge brakes when I bought it. Let me know if you have anything, or if there is a place I can purchase them. I have looked and can only find pins and clips, no lever arms and...

btt

Looking for a good/decent condition Model A stock front crossmember. Willing to pay for shipping of course. Let me know what you have. Thanks,

Model A rear Brakes - backing plates look good, all hardware is still there complete with emergency brake parts (less cables), drums measure about 11 15/16" ID (measured with a tape measure mind you) $40 + shipping Model A rear Centre Section - appears to be in good condition, bearings still...

Btt

'40 Front and Rear leaf springs. both 12 leaves, Black one is the front at 38" eye to eye, Rusted but not pitted one is the rear at 41" eye to eye. $60/ea + shipping, also have the rear u-bolts, will go with the rear spring 2 - Wide 5 rims, one has some slight surface rust both appears to...