Search results

will give a 1000 dollars for tag number 314-302 and give a 1929 colorado plate with the money, long shot this was my grandfathers tag on his a model

Hi guys installing a scatt crank got the broze main caps the one you have to line bore, My machine shop is asking on the rear one there is a grove in the cap itself does this go to the rear or front???????

Just got my 26 coupe the motor is bad shape,Going to rebuild it just order the stroker-crank from scat, with 280 cam, 7 1\2 degree wheel, hp head, and got a vintage intake system zenith intake, going to run Model A rods and Pistons Made for the stroker crank, not sure why you cant run Model A...

sorry I see Mike beat me to it

someone call him see if he will make a A motor http://www.wimp.com/tiniestengine/

Mike that is why i say buy them ready made, but some of these and been on cars for years, maybe i'm lucky LoL

Terry the way i did mine is cut a v take out 1and 1/2 preheat oven 450 the used cast iron rods build with each pass when done pack it in sand and let cool. done this with three none broke couple of thousand miles on each

Totally agree, 35 dollars very worth it.

Snyders now sells them, so no cutting and welding all four of my A's have them

You can look for a 2 tooth with the 28-29 steering wheel. it is key different from the 7 tooth, this was built for a few months think last 6 months of 29 good luck

Here is one way I did it take a pencil into the plug hole at the lowest mark the pencil at the highest mark the pencil measure in between. if it is 4 inch its a 390 3and 3/4 352

Terry every little bit helps, going 040 and run a H/C head from synders I could always tell the difference. Now for the math formula I guess that would be billfold x Desire = results

just got my calender why to go

Re: Before and After – The Sad Story of the Packard Plant I have four Packards they are great cars too bad the government in 1956 did not do bail outs

The Shields I saw was around the bottom part of the oil pump half way. Please help me out how this was helping distributing oil around the cylinders. I cant see how thanks AL

the 31 Vicky has two arms and two springs, please check door alignment my 31 was way off the past owner just kept slamming it shut after about a day and half of blocking and re-blocking the body my alignment is now great you can close my door with one finger. you want to piss me off slam the...

check points gab 020. if thats good check timing, my A will climb straight up, yes just 40hp but gear right pulls like hell. pulled Petite Jean Mountain straight up for 3 miles just kept watching the quails butt. good luck

Seen this both ways assuming this will trap oil in a curve and not starve the pump. Never seen a pump starve for oil while running without one, My opinion just another waste.

Fixed many of these just take a ******* file large one work the top untill flat and no more warp

You know both are great but the Steermen was such a rush too bad my pocket are not deep enough to have both :):):)