Search results

Update. Hate to revive such an old thread but… All of the big supply houses are still out of stock but I found them! Ahooga Parts is the one that manufactures them and he has them in stock. Unfortunately, his website doesn’t come up on a search for the panels. He has the tooling for...

Thanks for the info. Yes, these are ‘32 spindles. I was able to clean them up and the bearings now slide on. I will be sure to thoroughly clean everything before assembly. They still need paint and I am pretty meticulous about prep. So the seals are the cups built into the spindles...

Re: Ted’s brake floaters Snyders sells them in the US. They have a couple of different versions of the kit. They aint cheap. I believe they will work on all Model A as well as 32-35.

I guess pictures help: This bearing. Thanks,

Hi There, This may seem simple but... This is my first time assembling a front end. The spindles I have are new to me and have been cleaned up but are still 90+ years old. Do I grease up the spindle before sliding the bearing on? Do I clean it up with some scotchbrite?

I got them all out. (I used a Crows Foot wrench to get to the seat nuts, I always wondered when I would need one of those...) I jacked up the body under the cross members and wacked on the frame with a big rubber mallet. It popped loose on one side then the other. Thanks for the help!

I need help. I have Googled and searched here but I have not found what I am looking for. I am trying to remove my '31 Tudor body from the frame. This is what I have removed so far: Bolts at the front of the cowl, one each side. The nots on the pair of carriage bolts on each side of the...

I have to repair the rust on my inner fender wells on my 31 Tudor. What gauge steel have you used to do that? I was thinking 18ga but maybe 20ga to make it easier. This isn't a pure restoration, more to cut out the rust and make the car usable. Thanks,

This may seem like a basic question but its coming out of an abundance of caution on my part. I am having a '51 Mercury flathead built and it is currently almost done. Watching several videos on YouTube many folks recommend going over your block with a propane/MAP torch and heating it up...

Thanks for the info on repairing the mount area. I was just mulling over the best way to approach a fix. You method sounds really doable for me. It is an Edmunds intake.

I picked up an intake and some carbs and checked on my engine build. This is my first flathead going in an AV8 '31 Tudor. The engine is a Mercury EAC. It had never been rebuilt and was rather clean. Ended up .030" over on the bore.

I have heard bad things about Speedway stuff. Centerforce sounds good.

What clutch setup are folks recommending and running? This will be a fairly stock engine build. It will have a Max 1 cam and maybe dual carbs with headers so nothing gnarly about it. Just looking for a comfortable cruiser.

Hey All, What parts am I going to need to mount a 36 Ford Truck transmission to a Mercury EAC Engine? Are the truck transmissions any different than the passenger cars that year? Thanks,

Not much new to report. All of my lines on replacement inner fenders have turned out to be scams. Sigh. What is it with people? I did get brave enough to cut out some rusty metal. I also created an access hole so I could get a dolly behind the fender. I started to move some metal to fix...

Nice work Rusty. I am inspired by your abilities. I had thought about that but not sure it will get the end result I am looking for. I think this is where I am going to end up. Cut out the bad spots and form small patches. I have to do some body repair on the rear corner so cutting out a...

Thanks for that info. I will likely be moving to tube shocks so clearance for the originals won't be an issue.

Hi There, I am working on my '31 Tudor and have gotten to the Inner Fenders. As is normal, they are pretty rotted out. Patch panels for the Tudor are out of stock and no one can tell me if/when they will be back. Most folks tell me that the patch panels need a lot of fettling anyway so I...

‘31 Tudor Inner Fenders Does anyone have a source for inner fender patch panels for a ‘31 Tudor? The parts places I have checked are out of stock. I am in need of a set. Thx Joe

I am stripping my ‘31 Tudor and found these layers of paint. Is the light blue/gray color the original paint? It seems there is a dark gray primer under it. Then a layer of black (which is what I thought was the original color) and then the nasty metallic red on top. I also see drips of...