Search results

Thanks LEM for the info. Glynn

Could someone tell me the size and thread count of these tie rod threads? Glynn.

Both the HAMB and the Barn are awesome. I've gotten so much from both worlds. Thanks to all in the community who shared with the rest of us. Glynn.

I appreciate all the help from you guys, Thanks, Glynn.

Thanks for the reply. Does the taper go down and towards the transmission?

Could someone advise about the length the new driveshaft key should be? The repro I received is 2 3/8 inches long but the original seemed to be about an inch longer or so. It's the second series driveshaft with the press on pinion late 28 to 31. It took a strong press to get it pressed off so it...

Hope you will post more photos of the car.

Amen on Mac's transmission book, it's awesome.

Thanks to all of you for the help. Glynn.

I cut out the swedge with the correct cutter but a machine shop tried to swedge new studs but ruined one drum. I converted it to press in configuration as per Dick Spadaro's instructions. When I took them to cut down the inner lip to fit the Model A axle it wobbled so he said the hub was bent...

I have 40 style with the hubs behind the drums and they came from macs antique parts. I hope I didn't bend anything trying to pull them together. The labor to bore these drums is as much as a new one. There seems to be a lot of junk that doesn't fit in this hobby. When we tried to cut down the...

Has anyone bought new brake drums that the center opening was too small to fit the hub, even a press fit. Would it be best to have a machinist open it up rather than cut down the shoulder of the hub? Thanks in advance.

MACS is in the process of shipping their inventory from New York to Florida as they told me. That's what caused some disruptions in shipping. I'll bet it improves in the future.

Hey Bruce, does the early bushing press directly inside the late one or do you have to remove the late bushing? Glynn.

Thanks Bruce, It looks like the 8 and 7/8 inch is the length I need to make it. This site sure is awesome. Glynn

Thanks for taking the time to help guys. Glynn.

Could someone help? I'm using a Thickston PM 7 intake made for a 32 to 48 but bolting it to a 53 8BA engine. Could someone suggest the correct length to shorten the later pushrod? Thanks, Glynn.

Thanks for all the help guys. I think I'll try the ream and press fit route because my budget is going faster than my progress. Glynn

This my first build of a 29 AV8 traditional style. I'm using 39 style brakes and I'm trying to get the reproduction drums swedged without much luck. I'm using American made drums from Macs with the recommended studs. The machine shop couldn't get them tight and ruined a new drum. Could someone...

Would you sell the intake separately? If not could you tell me the source for these.