Search results

  1. C

    Saginaw 525 in a 36

    Re: Saginaw 525 in a 1950 Oldsmobile I measured the 525 box up to my 50 Oldsmobile. Two of the bolts Lined right up. I had to heat & pound in the curve in the frame Slightly (the diameter of the new box is slightly Greater) I drilled the third hole in the frame, Welded a round tube through the...
  2. C

    1940 Ford convertible windshield garnish molding

    :)Need original 40 convertible windshield garnish molding Right & Left Pieces Do not need center mirror hanger Piece. Thanks Rick Rentschler Napa, Ca.94558 707-738-1046 midyearvet@aol.com
  3. C

    40 Ford conv inside W/shield center garnish molding

    Please Delete
  4. C

    40 Ford conv inside W/shield center garnish molding

    Wanted to buy from 40ragtopdown 40 Ford conv inside W/shield center garnish molding Thanks Rick Rentschler Napa Ca midyearvet@aol.com
  5. C

    40 conv inside Windshield center garnish molding

    Looking for a 40 convertible inside center garnish molding. I know 40ragtopdown reproduces one. Lives in Elyria, Ohio If anyone knows how to contact him. I would be very grateful. Thanks for any help Rick Rentschler Napa, Ca. midyearvet@aol.com
  6. C

    39 deluxe cat whiskers

    I think Bob Drake Has Them
  7. C

    40 conv inside W/shield center garnish molding

    1940 conv inside W/shield center garnish molding w/Radio Thanks for any help in locating one. Ford made that molding both with & without a radio.
  8. C

    1940 convertible inside rear view mirror-w-antenna

    Wanted !940 convertible inside rear view mirror/with bracket to clear antenna lead Can get by with mounting bracket to windshield center trim
  9. C

    Has anyone shortened a rear axle shaft?

    I made an overdrive to go behind A 350 turbo in the 60's out of a chevy od trans I had the input shaft tested for Rockwell hardness. Had it annealed cut the shaft to length, turned the diameter to size, splined it & had it heat treated back to 60 Rockwell. I ended up with a 4spd automatic with...
  10. C

    40 convertible seat

    Slide the seat forward and you should be able to reach the bolt heads. The seat is adjustable for & aft. Its probably all the way back.
  11. C

    40 convertible seat

    Slide the seat forward and you should be able to reach the bolt heads. The seat is adjustable for & aft. Its probably all the way back.
  12. C

    1940 convertible inside rear view mirror

    Wanted 1940 convertible inside rear view mirror I believe 1937 to 1940 station wagon or convertible will work Thanks for any help Rick R
  13. C

    Oil sender test

    Looks like it can be adjusted on the back side. A small screw driver thru the hole on the back can be used to rotate that 1/2 gear varying the pressure.
  14. C

    Taking a Poll - 39/40 Owners

    1=76 2=1940 convertible 3=10years 4=convert 5=deluxe 6=ca.
  15. C

    1937 Transmission Synchronizers

    Van pelt's pt.# for just the brass syncro. ring is 81A-7101 $11.00 ea. Rick Napa, Ca.
  16. C

    Use of Staples to Attach Things as Originally

    :)Drill 2-1/16 holes 1/2 inch apart put the staples in and bend the ends over. I've done this for years and it looks correct.
  17. C

    Front seat won't lock in place

    Weld it up file the shape you need & re-harden it. Rick Napa, Ca.
  18. C

    Power window conversion in 41 Ford 1/2 ton PU

    I too would highly recommend the nu-relics regs. I put them on our 32-3window. They bolt in like the factory regs. & work perfectly. The hardest part is running the wiring thru the door jam. You need something (spring) that the wiring can move in a little bit. Good luck Rick R Napa, Ca.
  19. C

    60's Ford screw on master cylinder cap

    mid to late 60's screw on Master Cylinder Cap. Thanks Rick Napa, Ca.
  20. C

    '39 power windows

    I used a set of NuRelics window regs. in our 32-3W They bolt in like stock regulators & work great. A little pricey but are a great product. For a '39 coupe. would be part #73700-2 $683.00 +
Back
Top