Search results

Best OLD food guy around 36fordguy

You forgot the front pulley change and the oil pump pick change 36fordguy

got one from speedway put iton my 36 PU works great set to any temp - control fan on/off 36fordguy

Happy Birthday, Ron ! 36fordguy

The best engine size Have experience with is 5/16 x 1/4 ran super strong and lasted 36fordguy

10 amp 450 piv diode should do it 36fordguy

restored a coupe - very few parts available because the coupe is "one" of a kind. Some parts are hard to come by. 36fordguy

Mine has 3" thk with 4 tubes 36fordguy

The stamped bell will allow you to use the later model bendix on your starter 36fordguy

You are missing the problem with Griffen radiators. The radiator itself requires about 11 lbs pressure (dynamic ) to fforce the water thru the radiator. A external cat (top of radiator) has to be more than this or you will pump water out the over flow. If you less than this on the top cap you...

86 with 36 pu with 53 merc engine drive it everyday in northern NV

It's an after market RED HEAD brand water type std heater. Small water filled core with an electric fan blowing air thru the core

Question on heater, I have a 36 pu with a stock water heater and 8CA 53 merc motor and 8RT water pumps. The input to the water heater I use the top outlet in the pass side of the moter The outlet of the heater goes to the 8RT pas side water pump. This side of the motor takes a long time to come...

easier to change to LED bulbs Better lighting and less power 36fordguy

The clutch disc is not the correct one for the cover. If the fiber section of the clutch should be the exact same as as the cover if not the disc will chatter.36fordguy

The thermostat is designed to control the temp at a particular flow rate- not at any old flow rate. So what non ford thermostat for a flathead are you using. 36forfguy

Come on guys It's only $30000 . It's a nice looking truck - Try building yourself one for only $30000 - 36fordguy

As an upholsterer I understand acme only will sell through distributers not to the public so contact an upholstery distributor like Keysto Bros . I have used Acme Headliners for 50 yrs top notch - They have patterns for anything

I use Weldwood Contact Glue for most everything - I'm an upholsterer , This glue will take the sun heat . I use it for tops , door panell, and etc. Coat both sides - Let dry use wax paper as a separator to get the gasket in place - Remove the wax paper press together. 36fordguy

The brassworks radiators are fabricated with the fins that slip over the tubes and tubes are bigger than than alum cores. The narrows tubes keep the Reynold number about 4000 to 5000- this causes turbulence in the tube and increases cooling. If you go to a modern radiator than go a complete...