Search results

Guys, I may be mistaken. Today I found an article that gave measurements of 16 by 27.Our height is 16 & 15 That tells me the glass is rectangular with no sloping top edges. That would solve our problem. If anyone has a Murray 4 dr. where the rear door glass is straight across the top of the...

Does the glass peak on the top ce innter and taper off on the top sides just like the top of the door window ? Our glass was cut with only 1 taper at the top. As the window reaches the top 1 side touches and the other doesn,t.

Jay, you are correct the rear door glass only goes down about 1/2 way. Today I used our new repro 20 " reg on the pass. Rear door glass & it worked perfectly. The stiffness problem was cured by using our original 12.5 " reg.instead of the repro. Norm

JayJay, does the left ft. repro reg.( 10") move the glass as freely as the orig ( 11.5") ?

Jayjay & others, thank you. Now we know the one we have is original. I,ll weld a piece on the repro. to match the original length. Are we in agreement that the inner U Hopefully these changes will eliminate our binding.Channel faces to the inside of the car? Norm

What is the orientation? Which side faces towards the inside of the car? Is it the smooth side or the U shaped groove? I didn't see them before they were removed. How long is the winder arm from the center of the spring loaded button to the center of the spring mounting pin slot ( approx 11.5"...

Guys, thank you. I agree with how the arm fits into the metal lower window channel. We have the 4 hole regulators. I suspect they can be reversed for either side as each unit has 2 spring tail locking tabs. The center spring can also be reversed depending which side they need to go on.Next week...

We have 1 old reg. for the Drs. right . It's arm is 12" c to c between the spring loaded button & the center of the spring. The new Tudor replacement is 10". The reg operates smoothly as does the glass while pushing it manually in the new felt channels. The problem is when the assy is all...

Thanks, it was a basic 4dr. ( no cowl lights) & the I interior dome light was in the center of the headliner so I suspect 165c is more fitting.

Hi folks. I,m helping my friend finish his A. What side does the reg. arm button fit into the metal window channel on the bottom of the dr. glass? Does it enter from the smooth side or from the back where the horizontal. U channel is? All he has are new metal channels # A-45963-A. I never saw...

With a visor the windshield is not slanted.

What is the correct model #? It has the windshield visor,arched upper door window frames and the 3rd window does not open. I,m helping my friend finish his A but he now has been diagnosed with Alzheimer's and now has forgotten. It is a Canadian built car.