Search results

Thanks to all. Based on the information, I now have the correct lights. The measure abput 4.5 inches in diameter. Now I am on the search for the arms. Thanks again - Kevin

I'm sorry a 1929 Town sedan, I have a two bodies and want to make sure they are correct. I need a diameter from someone. If they are correct, I need the arms. Thanks

Can someone with a 1929, provide me with the diameter of the original cowl lights? I assumed 1930 lights were the same, bought some, was then educated and now want to confirm I found some for my 1929. Anyone out there have some one or both support arms for 1929 cowl lights? Thank you...

I would like to purchase some cowl lights for a 1929 Town sedan - email krmoran2000@yahoo.com - thanks kevin

Looking for set of original cowl lights for 1929 Town Sedan thanks Kevin 970.241.7542

Mike, Would you sell your extra 21" wheels separately to a former Paonia resident? I am in GJ and need to restore a 29 Town Sedan. I found cracks in three of my wheels and need to replace. Thanks Kevin

Bill, Don't feel bad about not knowing the difference. In the lst month is when I learned on this site the differnce. You can search the forum discussion for krmoran2000 and see some replies to my questions. The cracks on my wheels and what others say is common are at the of center hub...

Are these the B wheels or AR wheels? And are there any cracks? Thanks Kevin

Thanks Benson - Based on the measurement, I have the later wheels. I also put some tape with dots of wet paint on the back of the wheels and put the wheel on the drums. I confrirmed contact at the outer flange and the wet paint was tansfered to the drums. I know the wheels are making contact...

Sorry if this a repeat. Not sure if the earlier posted. The Figures 661 and 662 that Benson sent. Is this the front hubs or rear. My front hubs have a taper like shown in Fig. 662 while the rear hubs are as shown in Fig. 661. I cannot measure the wheels because they are being sand blasted...

If I have a 1929 Briggs Town Sedan 155-B would it not require the later BR Wheels? It is possible I have the earlier AR wheels. Is there a way to tell the difference in the wheels? My "Collectors Originality Guide" by Schild, page 12, says the earlier wheels (AR) has an 1 3/16" wide inner...

Benson, Thanks for your reply. unfortunately, currently, I do not have the service bulletin you mentioned and I was not aware of the two types. I figured if they were 21 inch, that they were the correct size and wheels for the car. I have searched the web for a quick answer. Can you or...

As a first item of restoration, I removed my spoked wheels from my 29 Model A to take the to the local power coating company. We noticed at least three of the wheels have some minor cracks at the hub where the spokes come to the center. The guy who power coats says he see this very often with...

Hello, I am purchasing a 29 town car from my elderly mother to keep it in the family. The car has been in the family for some time but not driven for at least 30+ years. I remember stories that my grandfather had a "hot-rod" motor in it or as a spare. My limited research indicates that the...

Hello, What year did the come off of? And what form of payment? Thanks Kevin