Search results

Brassworks

I have the pan but no deflector. Maybe hotcoupe could email me also wit ha pic jsnyder223@comcast.net

Would you like pictures of the hitch that came with my 37 1/2 ton pickup?

I am also restoring a 37 1/2 ton. I have the original radiator from mine which needs a new core and haven't been able to find a radiator shop within a reasonable distance to do the work. I bought a new radiator from Brassworks which is about 95%...

The cables to the drums makes it a 37 or 38.

Ask Brassworks if they have an "orphan" radiator. They had one for my 37 pickup which was very close and saved me over $500. I'm not trying to do a full restoration and someday I will find a radiator shop who can recore my original.

I painted my rims with a 2 part urethane and since I had paint left over, I also painted my running boards.

Thanks Randy

I'm getting ready to install new fuel lines on my '37 Pick up. I have a new fuel tank and it has been a few years since I removed the old lines. I would appreciate a few pictures which show the routing and location of the lines from the tank to the motor. I...

Let me know if you want to buy a radiator. It's been checked and I can send pics.

Thanks JSEERY

The drain on the bottom of the filter goes where? And the other runs from the back of the block at the pressure sending unit to the side of the filter? A good picture might help.

I've been looking every where to find information for the oil lines from the filter to to the port on the back of the block and from the bottom of the filter to a port at the intake. Size lines and fittings? This a 24 stud from 39 panel.

I had a tool made to pull them out. Also need heat and a hammer and fianlly drilled them out. Have pictures of the puller.

I finally got one of the old perch pins out today. All it takes is some heat, a drill, some more heat, penetrant, some more heat and a BFH!. The other might come out easier I hope.

It was finally warm enough to work in the garage today. I removed the axle from the frame today, used heat, used the puller I had made. Flipped the axle over and drilled a hole down the middle of the bolt , more heat, more pressure and it still won't come out.

If it was a radiator for 37 pickup, I would be interested. Just saw one go ebay for $350.

Most trailers used to transport cars in reality are not carrying that much weight. Open or enclosed. Several years ago when I bought my travel trailer (26 foot tag a long) I did some research and it was recommended that the tires be replaced after 7 years, regardless...

A few years ago we had a fellow from up north move into the area with a collection of cars. He even has credentials to judge at certain car shows. Through the years he has accumulated a collection of trophies and after our clubs show last year, he offered to...

What a treat to come to this city for other reasons and find a parking lot full of T's. The license plates were from all over and when there were mechanical problems it was fun to see that each owner came prepared with spare parts. This is a great bunch of...