Search results

Working on a friends roadster and he is needing two Axel housings. Need very good outer bearing surface with minimun wear. What u got???

I have s set of counterweights from Berts. Bolt on then weld the ends. Set of 4. Each one weighs 3.1 lbs total weight of 12.4 lbs. They are the samee thickness as the counters on the crankshft - 5/8" thick. also. crankshft turned 10/10 under weighs in at 24.8 with no counterweights...

Yes, you still have to cut the Torque tube, Drive shaft and Radias Rods.The length of the Torque Tube is critical to within 1/32 of and inch. If too long or too short will not mate to the trans correctly. Radias Rods are teh same problem If to long or too sshor will n ot fit to be boss on the...

Are you running an original or original style popout switch??? ken

Tudor Sedan seat frame and spring for 28 29 Tudor. Only have one. $25.00 plus shipping. kenparker0703@yahoo.com

I would wait until I had the Pressure Plate in hand and measure off the new plate.

...and here is my Lionel. Vintage Christmas 1951. It now sit on a dusty shelf in my shop as a reminder of good times 70 years ago. ken

stainless rod from the local hardware store.

BRIERLY head. didnt know there wa one. Tell me more or where on facebook do I look. ken

I ahve built and rebuilt a bunch of them. Since yours has a standard Model A bellhousing I know it is not one of mine. I still do maintenance work and rebuild some of the parts on the inside. I am completely out of useable gears, but still have syncro rings ans bearings - new and good used...

Shwe, the "missing teeth in picture five" are NOT missing teeth. That is th way the way they are made. A small "rocker " rocks in that space as you shift between the two gears. Syncros and forks and shifters show some minor wear but not enough to effect anything. Nothing out of the ordinary...

To add to JRN's note. To get the top/tower OFF the shifter must be in second gear - and to reinstall the top/tower it again must be in second gear. I doo=bt the problem is inside the gearbox. If it were the rattling around part/piece would have gotten into a gear and broken a toothe by now.

In answer to initial question. It depends on which head and how much is milled? Depends on which cam? Is the Weber jetted correctly? Keep in mind. Electricronic ignition does NOT add HP. 12 volt vs 6 volt does NOT add HP. Be more specific and you get more accurate answer, ken

The car or truck will be a "Model A" as long as the state issued title says it is a "Model A." Anything else is opinion. he-he.

Check the soot level - color of your spark plugs. Smell the exhaust. It should NOT smell like a diesel. Check color of exhaust. again, it should NOT be black. Both of these are symptons of running rich, which would account for the 11 mpg.

????'s Is this a relative new radiator, or a 90 year radiator that has been shaked, rattled and rolled for 90 years. Two row or three rows of tubes. 6 Fins per inch or more. have you pointed and used a infrared pointer to see if it has hot spots or hot all over. $600 or more for a new...

Woody SiD will not be able to cruise this coming Fourth due to a broke leg. She is undergoing a rear end rebuild this weekend due to some wierd cliking noise. She will be "back on the road again" by next week. Meantime the rest of the family will certainly celebrate the birth of this great...

Follow up on 31Abone's comment. You can not see the Ujoint by pulling /removing the clamshells. The Inner Cup is still in there blocking view of the ujoint. I pulled my rear end out of woody yesterday and am inspecting for a clicking noise in the rear end. Very loud clicking concentrated in...

I agree with Dave in Australia's comment.

Body is complete with all the sheetmetal. Rumble seat. Even has the top irons. Needs tires and tubes. Two hold air Three do not hold air. Rumble Seat cushions and driver/passenger seat cushions in excellent condition. Engine and transmission rebuilt but not installed (on engine stand). $5500...