Search results

I asked if there is a mechanic within 50 miles of south bend in. I got no response, I’ve drove this modelA for the last several years this summer I noticed that when you first start it up I hear a small knocking noise & I’ve also noticed that it does leak more oil from the rear main. Being I...

Does anyone know of a model A mechanic within 50 miles of south bend in that could check the clearance of the engine bearings

I’ve been looking for a model A delivery van. But I found a 38 delivery van it has no motor or transmission in it. I can’t find a v8 motor for that year. But I have an extra model A motor and transmission. Does anyone know if that will bolt to that 38 without doing any modifications. Thanks Randy

I ordered new floats after I installed it I found outthe float leaked. So I called the guy where I bought it & he replaced it with another one. So before I installed the second one I put it in warm water to check for leaks & that one also leaked. They are both leaking from the same spot on the...

What is the date of the Kalamazoo swap meet

How do you know the difference between a 2door sedan or a 2 door Tudor?

Does anyone know when the Battle Creek mi swap meet at the fairgrounds is & the address. Also when is the Kalamazoo mi swap meet.is there any other swap meets within a 100 miles of south bend in.

Does anyone know the dates & the addresses of the Kalamazoo mi swap meet. Or the Battle Creek Mi swap meet. Or any other one within 100 miles of south bend In.

I have to hit starter switch two or three times before starter engages. All it does is make a running noise and then 3rd time the starter will kick in. Could that be the drive spring

Does anybody know how tall a 29 model a panel truck is. And have any idea what it would cost to have it delivered about 2500 miles. Thanks Randy

I’m thinking of building a doodlebug every time I see one they seem to always shorten the frame does anyone know why I hate to cut down a good frame. But there must be a reason they do that.

I’m trying to set the float on a zenith according to Les Andres book the float is supposed to be 1 inch & you’re supposed to set them by the washers under the valves . Mine measures about 1& 1/16th with no washers at all under valve. They say not to bend the float. What are you supposed to do then

Yea if it’s in good shape. If you’re interested call me 2695915334

I’m in mi by the Indiana line. The cowl doesn’t matter because I’m just making a doodle bug.

I have a diamond motor complete I don’t know any thang about it it what is it worth I would like to trade it for a cowl in good shape

Does anyone have the phone number for reemers corner it’s in mi. I may not be spelling it right

Does anybody have any tricks of holding the switch spider back so I can put the retainer clip on. I’m not strong enough to put the retainer clips on

I have the exhaust manifold off it appears one half of the valve guide might be cracked in half. One side of the valve guide is about one quarter inch higher than the other side. Should I pull the head off & replace the guide or is this Norma l for Model A thanks Randy

I have a model A that has adjustable lifters. Can the valves be adjusted without taking the head off. I put a wrench on them all it does is turn the lifters. How do you hold the lifter from moving when you turn the adjustment nut

Some of my exhaust valves are running .012 the book says they should be .015 is .012 close enough or should I have the valve stems ground down. If so what kind of grinder will I need. Some where I think I saw where they used a drill sharpener to grind the stems.