Search results

My late 31 Victoria has the Rocky Mountain style front hubs. After replacing the bearings and races and spinning the hub to "preload" the bearings, I still have some in-and-out movement on the hub. It is about 1mm of movement. Is that close enough or should there be no movement at all? If I...

My late 31 Victoria has the Rocky Mountain style front hubs. After replacing the bearings and races and spinning the hub to "preload" the bearings, I still have some in-and-out movement on the hub. It is about 1mm of movement. Is that close enough or should there be no movement? If I...

Hello. I recently purchased a 1931 Victoria and removed the 19" spoke wheels to repack on the front wheel bearings. To my surprise, the front hubs are a later V8 style (circa 1935) hub. I am not experiencing any driving or braking issues, but my question is whether or not this type of setup...

Hello. I am searching for a pair of sun visor brackets for a 1931 Victoria. Please send me a message if you can help. Thanks. Mike Hanson drpepper1885@suddenlink (dot) net

I haven't seen the White Riversides, but I did purchase a set of the "new formula" Universal white tires last year. All was good until the last month or so when they developed the infamous brown ring. Nothing will get it off. I only drove the car 10 miles and on concrete paved roads...

Good point about being able to tighten the hose. I like the idea of just attaching to the overflow tube in the top of the radiator. That would make it a lot easier to monitor when to replace. Thanks for the advice.

I recently acquired a 1915 roadster with an aluminum Z head. I was told that these type of heads tend to deteriorate if you do not use a "head saver". I got the pictured head saver part from one of the parts vendors. Can this part be installed in the water outlet as pictured below? Thanks...

Fantastic work. Looks great!

Hello everyone. I received the following reply from a poster on the MTCFA board, which answered my questions. The position of the commutator was correct after all. I sucessfully timed the engine tonight using the following procedure. Thanks again for everyone's input. Hopefully this post will...

Hello everyone, I recently purchased a 1912 Touring car that has a True-Fire system. I realize that there are many opinions regarding this system, but it is all I have at this time. I really need some advice from someone that has experience with this system. The phone number of Bittner...

Good evening, When you torque the head bolts on one of the early blocks (mine is a 1912), do you torque to 55 lbs or something less? At 55 lbs, I have already had to helicoil two bolts. I heard that the early blocks were not cast as well as the later versions. I checked the trusty Ford...

Well, I probably did it this time... I went out tonight to see if I could loosen up the head bolts (so that I could change a head gasket for the first time this weekend) and was successful on all of them. In the process of trying to gain clearance to the passenger side of the head so that I...

Thank you!

Thanks guys for the quick replies. Redmodelt - I was curious about your statement "brake bands before the improved model used the drive plate as part of the brake drum." By "drive plate," are you meaning the "transmission driving plate assembly." The brake band definitely hangs out over...

Here is a picture showing the brake band and its position relative to the drum. The arrow shows how far over the band is.

Hello everyone. I purchased a 1912 touring this weekend and have started to get into the engine. The pictures below are of the transmission bands. Are the bands supposed to line up exactly over each drum? I have tried to highlight where the bands appear to be slightly off the drums. I...

The wooden wheels are newly reworded...an expensive proposition to say the least. That is the reason for my concern - just not wanting to mess them up. I will try oiling/ grading the casters to see if it makes any difference.

Hello. I recently purchased a set of car dollies/skates from one of the large Model T parts houses so that I could reposition my Model T when I needed some extra space in the garage. I have found the car very difficult to move without having some apply a fair amount of pressure to the wheels...

I have had positive experiences with Bert's in Denver and also Mike's in Georgia. I believe that all the parts suppliers are trying their best to provide good service and products. When I recently had a problem with a used Model A part, the vendor went out of his way to fix the problem...

Hello. In the course of searching for replacement wooden wheels for my 1917, I have run across different types of front hubs. Does anyone know of a source that would have pictures of the different style front hubs Ford used for the Model T prior to wire wheels? Thanks for you help.