Search results

  1. O

    New Ring Gear Installed

    Touching base on ring gear installed. Reading previous posts does it make sense to spend some extra time and pin ring gear at 3 locations with set screws to prevent walking off flywheel.
  2. O

    Rear main seal cap

    I will post picture after l figure out to that option.
  3. O

    Rear main seal cap

    It’s the bearing cap.
  4. O

    Rear main seal cap

    Hi, Looking at checking bearing clearances pulled the rear seal cap and a small piece of the lip is cracked of in one piece about a inch in length. Right now my budget is not ready for a short block overhaul. My question will JB weld to attach back on for the short term work. at least till gas...
  5. O

    Cowl Band

    Hi, Looking for a cowl band for a 1930 Model A Truck. Thanks
  6. O

    Rear Springs U bolts

    Thanks will use c-clamps and take your advise doing one at a time.
  7. O

    Rear Springs U bolts

    Hi, I have a 1930 CCP the bed is off including the Cab. Thanks for the information.
  8. O

    Rear Springs U bolts

    Hi, My U Bolts on rear springs are rusted out. Ordered new U bolts. Just want replace them leaving rear springs in place on frame. Can l just C-clamp springs in place with multiple clamps. Or do l need a leaf spreader? Any help will be appreciated.
  9. O

    Cleaning out inside of transmission

    Thanks for the oil information We’re can you get the 250 gear oil? Thanks, Steve
  10. O

    Cleaning out inside of transmission

    Thanks for all the input ! The gear oil in transmission looked pretty bad drained out overnight Added small amount of degreaser let sit a bit then drained that then went ahead and sprayed some brake cleaner on all the sludge on gears evaporates pretty fast l also put a fan over housing to dry...
  11. O

    Cleaning out inside of transmission

    Hi, Looking at a simple process to clean out bottom of transmission without removing. Everything thing looks good and in working order. I read using kerosene or would it be easier to just refill and drive and drain and refill again ? Thanks, Steve
  12. O

    Main drive gear

    Thanks for the information l pulled off bearing retainer on main drive gear slid off drive and to check bearings and scratch my head there was no main drive shaft bearing. May be why it was a bit loose. The main drive gear ball bearing look good. I place end of main drive gear into flywheel...
  13. O

    Main drive gear

    Hi, On the main drive gear on transmission l noticed some play movement is this normal ? Would the ball bearing be worn? Any help or suggestions would be appreciated. Thanks, Steve
  14. O

    Model A flywheel repair

    Hi, The flywheel housing not casing l worded the wrong way. My apologies.
  15. O

    Model A flywheel repair

    Hi, It,s the flywheel housing not casing. Please note correction. Steve
  16. O

    Model A flywheel repair

    Hi, If your in need of flywheel casing crack repair, l found a machine shop in MA. That does great work he cold stitches the cracks. J and M Machine co. Inc. 508-460-0733 Contact is John It’s a old school machine shop.
  17. O

    Model A king pin reamer

    Thankyou Red Ryder look forward to receiving old school model a reamer in original box. Steve
  18. O

    Model A king pin reamer

    Hi, Looking for a used king pin reamer the one sold by Snyder’s ford parts. Thanks, Steve
  19. O

    Model A Shocks

    Sold
  20. O

    Model A Shocks

    Up for sale 4 Model A shocks selling as is not sure what year they will need rebuilding. Will do PayPal for payment shipping will be included in total. If interested l will email photos. Thanks, Steve
Back
Top