Search results

The bearing spacers from MT and Early V8 Garage were made to be a press fit on UNWORN spindles, but almost all of the spindles have enough wear that red locktite is needed to prevent rotation.

I'm still here!!! We've been a little busy... Barners keep sending us good customers... Working WAY too hard for an old guy... (Maybe ran outa things to post???)

We use a 7/8" MC on our 1932 kit BECAUSE of the over-all pedal ratio resulting from our design. We use 1-1/16" on 33-34, 35-36 and 37-38 kits. If we install a "dual" MC on 33-34 we are stuck with a 1" which is not ideal due to the increased pedal travel required. We do have one with built-in...

THANK YOU ALL!!! Richard

Your 33 no doubt still has the original (rear) drums and wheel cylinders have been added to the original brakes... You need to find an ORIGINAL 32-34 rear hub/drum that has not been hogged out beyond the limit (12.060" on the West coast and evidently 12.080" on the East...) As you have...

WANTED FOR A CUSTOMER'S 1936 FORDOR: These are the two brackets that are riveted into the frame on which the 35-36 rear transmission mount (with the rubber O) sits and bolts to. Ford Part numbers 48-5059 RH and 48-5060 LH. Need a nice clean pair, not rusty or damaged, with good holes where the...

Mac's has the correct ones, but they and others obviously also have the old incorrect ones that they are selling. Before I was able to work with Mac's to have them corrected (several years ago) I had a tapered mill cutter made and actually cut the taper in the spindle arm deeper until 1/2" of...

I just measured one from Bruce's and the flange is 1/8" thick. I've been meaning to suggest to Danny that he make it 1/16" instead. We made one for Dennis' T a few years back and made it 1/16" and was not a problem having it thinner. The extra thickness does create some issues regarding the...

Ted: Actually our conversions are designed so that NO butchering of anything is involved and uses factory holes in most cases, and no need to relocate the battery, and uses original pedals. For those who MUST keep mechanical brakes, Ted is the man. Otherwise, there is a good alternative to...

Hey Dick! I think he is saying that his hubs are on top of the drums, which would be what we call an "outie" hub that is used with an "innie" drum, which are the "problem drums." I think the only "innie" drums available are from South America??? I don't know if the old issues with those have...

Thanks again Charlie!!! For those who prefer mechanical brakes I have no quarrel. However, IF one prefers to convert to hydraulic brakes while doing no harm, we have solutions... 39-42 Ford/Lockheed brakes have adjustable lower shoe anchors to PROPERLY CENTER THE SHOE LINING in the drums...

We have been extemely busy and I have not been posting on the Barn very much... It is difficult to tell from the photo which style hubs/drums you are trying to mount. The style that the hub flange fits INSIDE the drum are preferable, whereas the style where the hub flange is on the OUTSIDE of...

Thanks again Charlie! It was great to see you again... Richard

Thanks guys! Your positive feedback makes for great satisfaction at this end too! Phil: Send me an order; tuition is due! My website contact has failed and too old to fix (like me!) so have to make a new one. Meantime earlyv8@aol.com is the best contact (that is where the contact on the...

A huge THANKS to all who recommended our stuff and for posting the photo sheet. My little CS website developed a "malfunction" awhile ago and I learned today that it is too old to fix... So I will now have to get off my *%@ and make a new one - standby! Meanwhile, my e-mail is earlyv8@aol.com...

Once again, THANK YOU Bruce! Regarding adapting hydraulics to the 36 spindles, it can indeed be done as you describe. The "inexpensive $20 kit" that you refer to does consist of two piston rings (too thick and brittle) and two valve seats (wrong dimensions). As you say, the 36 (and many 35)...

We have one in our shop that is RHD from Argentina, as is the owner (from Argentina, but HE is not RHD :) The car belonged to his father. He brought it to California when he moved here many years ago. There are MANY people who do not consider it to be a true roadster because the...

Thanks to all for the nice recommendations, and especially for spelling my name correctly!!! My son Dennis, who does most of the hard work, also thanks you...

The axles in the early rear are the same as Model A and ARE NOT usable in the late32-34 rear, or any other later rear. In fact, that applies to all of the other parts in an early 32 "B" rear, except for the seals, filler and drain plugs and some of the hardware... When overhauling a rear, it...

The bore of the original 39 MC is 1-1/16", or 1/16" larger than the dual MC. This will work, but will require slightly more pedal travel to push same amount of fluid, but pedal will be a little easier to push. You do need to confirm that the pushrod stroke (resulting from full available pedal...