Search results

I am working on a 36 fordor. I cut off the serial number on the front drivers side rail to install a steering gear box. I plan on welding the plate with the number on it in the same area but it may not look factory. Can this cause a problem down the road? I already have the title. Thanks. Jack

I am rebuilding the floor in my 36 Fordor. I have some subrails for a 2 door. I took out the old subrails a few years ago and cannot remember if the subrail goes directly over the frame or goes inbetween the door post and the body mount bracket. It seems to make more sense to go between the...

I noticed on my first post I said I would bend the eyes down I meant out. Thanks for the correction on lowering the ends of the wishbone to get the caster. I am going to try that first before I pie cut the wishbone. No worry about criticizing. I have learned so much from helpful people...

Thanks for the responses. I just got done bending that last eye tonight and got the bushings and shackles installed. I removed 7 springs and it seems lie everything is going together good. I do have some hangers and the ends of the wishbones hanging on the frame. My caster is about 0 degrees...

I am installing a 5.0 with AOD. I have removed the X frame and split the front wishbone. I am in the process of heating up the wishbone shackle eyes. I removed several of the springs so will I need to bend the eyes down to get the proper caster? Thanks. Jack

Hello, Starting to replace the floor in my 36 fordor sedan. I have front subrails that reach back to the middle door column but need the back rails that go up the hump.Has any one made them or have ideas on making or buying them thanks. Jack