Search results

what is the wood used in the Special Coupe?

Does anyone have signs of any sources for this belt rail trim molding?

For clarification, my vehicle, that needs a roof replacement, is a 1929 Special Coupe not a Sport Coupe — my roof does not retract (go down) like a Sport Coupe. Thanks Loumo, originator of a request for replacing a roof on a Special Coupe. And, a big thanks to those members who contributed...

Is it possible to get reprints of Lebaron Boney's instructions for Special Coupe roof installation. Will be happy to pay for the cost of reproduction and mailing fees. They sure would be a big help to me in redoing my top. Thanks loumo. loumo1@comcast.net

Bravo!! This gives me encouragement and means there is still hope for me.

Your car looks fine to me just as it is. I think you should enjoy your car and not focus on this fender issue. No one will notice this minor fender difference so you should put it out of your mind and concentrate on more important things on your A that may need attention. Since I live on the...

Mating original ‘29 rear fenders to Brookville 1929 Roadster quarter panels. I am having a problem getting proper spacing for the weltjng between an original undamaged rear fender and a Brookville quarter panel, I can’t get the space to be narrow enough. The problem is, the mating angles of...

Used a Brookville deck lid on my 29 roadster and was very happy with the fit and quality. It was one of the repro sheet metal parts that required the least amount of work to get it right.

I purchased Brookville sheet metal several years ago and they were off just enough for me to go back to my originals and contend with repairing them.

Cowl panel for my 1929 roadster from Brookville fit perfectly with no modification required.

I folded mine under the sub frame using hammer and dolly. However, The question I have is do you leave the scalloped edge open so it will drain water or should they be sealed off?

I would be careful not to use any metal objects in trying to relieve the dent. It is not clear in your picture what the dented area is. I would try using two pieces of wood on either side of the dent that are mated to the finished contour you are trying to achieve and then using a "C" clamp to...

Brent, For someone 6 foot 2 inches and getting ready for upholstery on my 1929 roadster, please describe the best route to take to get the most comfortable seating. Thanks Loumo

Thanks Brent. We need to encourage this kind of talent and interest which truly comes from the love of this kind of work. And what I see of your work Brent, you are a fine example of this. Keep it up.

It is nice to see a young guy like yourself really take hold of this kind of work and do such a great job. Your intense conscientious attitude and great interest makes this happen and you are to be highly commended. BUT, take it kindly from and older guy with three sons much older than you, be...

I Had the the same problem, questioned the manufacturer regarding the hardener and found it should not be used if more than a year old. Using a new tube of hardener solved the problem and putty is well over 3 years old.

Stop procrastinating. What have you got to loose and much more to gain. Clean them up and prepared for the balance of work and parts that need to be addressed. You will have the benefit of a better fit with the original sheet metal and you can readily remove and replace them latter without...

I may have been remiss in searching this out, but is there somewhere in this Ford Barn system a tutorial to explain all the details of what all the mini icons mean and how everything works or should be used to get the full benefit of it all? thanks, Loumo

I have been using a 50/50 mixture of spearmint oil and peppermint oil saturated in speedi dry which is then bundled in panty hose and suspended around the garage. Creates a strong fumes which seems to deter the mice.

That is it in a nutshell. The information forthcoming from you Ford Barners is much too much important to even consider or have a concern for misspellings. In retrospect, after all the responses this thread brought, I was sorry that I initiated the thread because I perceived that some feelings...