Search results

Market value … So I’ve tried sorting through previous for sale adds on here to try and help me get a ballpark of what market value is for some of the stuff I’m selling to a friend . He’s gonna buy it all, he just told me to work on finding out what other people were selling the same items for ...

Sudden violent vibration … I recently purchased a 36 ford roadster , original drivetrain . It had driven pretty smooth up to this point . I was on a drive last night and suddenly the car began to shake violently, I was having to really hold onto the steering wheel it was so bad . I limped the...

I’m in need of a 1932 3w seat frame for a 3w coupe that is almost due for upholstery. I think a 5w seat frame is a touch narrower but worst case I would use that if I can’t find a 3w . Not sure if 1933/1934 3w seat frames are around same width as 1932 Ford 3w frame .If so I’d use one of those too

My 1932 Ford 3w is getting close to needing to do the interior on it . When I bought the car as a project it had NO seat inside was empty . I’m trying to find an original 1932 3w seat frame and tracks . If someone has one or the other I’d buy what they have .

Looking for a pair of Stewart Warner duplex gauges One is the oil pressure/fuel other is amps/temp. Thanks!

Stewart warner tulip 2 3/8” electric fuel gauge Looking for an early Stewart warner 2 3/8” electric fuel gauge to complete an auburn gauge panel for my car . Thanks!

Does anyone happen to know if a T170 can be used without having to cut up the stock K member . It looks like one of the smaller trans’ that offer an overdrive gear . Or is ANY overdrive trans just not doable without cutting the stock K member ?

Is there ANY way to run a newer style trans in a stock 1932 chassis/K member without having to butcher it ? Or do I need to completely remove stock K member and replace it with something else to make it work. To make a long story short I bought a rebuilt 39 trans but it was for a low HP engine...

So i had my car jacked up in the rear . With the car in neutral if I spin the tires by hand I can hear a faint noise that sounds like metal maybe scraping . Doesn’t do it throughout the whole time the tire spins just around a certain time of the tires rotation. I wasn’t driving the car hard ...

Since the regular type generators aren’t meant to handle the high amp of the newer halogen type lights , are there any lower amp 6v bulbs that put out a good amount of light ? Or is there any place that sells old style lights or a good alternative??

So lately I’ve come out to drive my 32 roadster and found that the battery was dead . I didn’t leave the lights or anything on so was confused how it had been drained . Hooked up the battery to a tender and reinstalled it and same thing happened again. I made sure to not use the lights at all ...

Was trying to figure out if this color combo on my car was one of the original color combos from ford in 1932.I believe my car is Brewster green medium (dark green)and it is trimmed out with a lighter shade of green (maybe regular Brewster green?)The two greens are separated by what looks like a...

I was looking into buying one of these to help handle the addition of halogen lights and some other items . When I looked at powermasters list of generator by years I noticed they do not show one for 1932 , It shows them offering one for 1939-1948. Would I be able to use that on a 1932 or are...

Just had my 32 rewired (still all 6 volt) and installed a new set of 682-j headlights with 7” six volt sealed beams . Took the car into town at night to pickup dinner (maybe 5 min each way ) Got out ,picked up food , car fired up , drove home turned lights and column switch off. Come back out...

Looking for an original column drop for a 1932 Ford . My mechanic put too much pressure on toggle switch and it broke the unit Send pictures to draggin49@gmail.com Thanks ! Luke

I picked up this headlight /taillight harness for my 32 v8 roadster . It came with a diagram . I’m trying to install a pair of 682-J headlights and a pair of 1937 ford taillights in the rear . Current wiring is in VERY poor shape.I’ve never wired any of my vehicles so I just figured I’d ask...

16” wire wheels Looking for a set of four 16” wire wheels . Need to be wide enough in rear to run 750x16 tire Fronts will be running 550x16 Need ones that are in pretty good shape , they will be going on a finished car . I will powder coat them after prepping them

In search of a 1939 ford transmission for my 32 roadster Rebuilt , working used one or rebuildable core would work as well.

Was looking into buying some 16” wire wheels , was curious how big of a difference there is in strength ? Or is it something not even worth worrying about .

Foot starter suddenly won’t work?? My 32 roadster has been fine ,never had issues with foot starter. Ran to the bank. Car fired up normally when I left . Get out the bank push the button and it won’t start, push the foot button and absolutely nothin happens.i was in the bank for only a minute ...