Search results

Is there a simple fix for a steering box thats leaks it's gear oil out the bottom all over the light switch? I added gear oil per specs from my parts supplier but most of it leaked out. Is a total gearbox rebuild required? Some in my local club use grease just for this reason but I've read other...

Looking for a B Model intake manifold to go with my carburetor. Vacuum port for wiper preferred but not required.

1931 Ford Cabriolet survivor. California car all its life so no panel rust. Was in storage and owned by the same family for many years. I purchased with the intent of restoring but with health issues I can't drive the clutch. The car is very complete with many new parts to make her run reliably...

I now see water and air slowing escaping up through the head nut that holds the distributor cable (#8). I'm guessing it's a cracked head, anybody have any other suggestions? This is a GAZ Russian B block with and A head using a B head gasket. I just put the head back and am sure the head nuts...

I bought a 31 Cabriolet 68-B and have been having a tough time curing a carb backfire problem. I discovered this engine looks slightly different from other As as the oil return line is missing and it has a fuel pump port with a cover plate on the block. Looking through some old hand written...

Newbie here so I apologize if this is basic. I start my car and it starts right up, but unless I pull the choke about 2/3 out it starts to backfire through the carb when I try to give it gas. My GAV is about 3/4 turn. After about 5 minutes I can push the choke rod all the way in, move the GAV...

While trying to find an intake leak I decided to remove my manifolds. As I tried to loosen the second nut from the front it snapped. I can see it must have been bent from a previous install. I can tell two of the studs and brass nuts were newer with loctite. Not the best way to start 2017! I'm...

I just bought a 31 Cab 68-b that was sitting since 1990. I've got her running but the radiator was full of rust and now that I've back flushed the radiator and block my radiator only holds water for about 10 minutes! I've researched new radiators and not sure if I should be worried about GPM...