Search results

Wanted 1942 Ford crank handle support bracket part # 21A-8210 as per the attached pictures.

I am trying to find a replacement 1951 Convertible, front parking/emergency brake cable, or an old one that I could use as a pattern to get a new one made. Any help or suggestions very much appreciated. :)

I'm trying to source a front parking brake cable for a 1951 Ford Convertible. I see that many of the suppliers only list a front cable for non convertible cars. Does anybody know of a source for the correct cable for a convertible? Thanks in advance for any help you can offer.

I am wondering if anybody is reproducing the '49 - '51 convertible rear window frames? My '51 came without a top, and I thought at one time the frames were being reproduced but I may be wrong. Any advice gratefully received. TIA :)

I bought myself a Christmas present that I found locally on Facebook Marketplace. It is a K R Wilson Valve Grinder, and I paid $100 NZ (@ $60 US), quite a bargain by all accounts. :) Some say that these are very rare, but considering I found this one in a small town in New Zealand, I wonder...

Trying to help a friend who is looking for a right front or left rear door handle for his '49 Mercury. I've searched the Swap Meet page without any luck, and any leads would be greatly appreciated. TIA Meric.

I was just wondering if anybody knows of a source for a stainless or chrome trim to cover the seam on the top/rear of the rear fenders on a '49 - '51 Ford. I know that they were available in the day, but I've never seen a set for sale and thought someone might have found another option to...

I have a '57 Sunliner and rebuilt the 9" differential about two years ago using a good used ring and pinion along with all new bearings and clutch plates and have only put less than 200 miles on it. It has now developed a clunking when turning left. I have read that this can possibly be caused...

Looking for the female vent window hinge brackets (left & right) for a '51 Victoria or Convertible. Any help would be much appreciated, thanks in advance. :)

When I bought my '53 the latch handle for the top was missing. I have managed to find a new handle but need to work out how to lubricate the latching mechanism so as not to break the new handle. Is there a way to lube this without removing the top?

I have a '53 Convertible with factory overdrive, and a Coronado kit. I was wondering if the overdrive emblem on the deck-lid should have been deleted or relocated when the Coronado kit was installed? There is no evidence of ever having the emblem, but the deck-lid could have been changed over...

I managed to buy a '53 steering wheel as below and found that the rubber insulation under the horn ring has gone soft and a little gooey. What have others used to replace this rubber cushion, as there is no thing else to stop the horn from blowing if I install this wheel? Or is there another...

Looking for NOS rear door latches as per above years for a Ford or Mercury Fordor Sedans. Also looking for complete used front door latches, worn out or broken ones are okay too.

I am looking at buying a 1938 Ford Laboratory Test Set in Wisconsin and need advise on an economical way to get it transported from there to Paramount CA for shipping on to me here in New Zealand. I am in no urgent hurry just can't justify spending a lot of $ on transport, or if anybody has, or...

Looking for 1951 vent window pivot brackets, Part #'s 8A-21467-76A & 8A-21466-76A. I can't find a supplier with any in stock and it would appear they are not being reproduced currently. :( Any help greatly appreciated.

Has anybody here converted their convertible top from screws to hydraulic? If so how easy is it? I have a '53 that is missing the top motor cables and screws and I have been unable to source replacements so was considering this option or leaving it as a manual top. I would be interested in...

I Have placed a request in the Swap Meet section but would like to cover all bases. I am looking for parts to restore my 1938 Ford (Heyer) Laboratory Test Set. I purchased this some years ago and need some pieces to get it functional again. Primarily I need the "Interrupter & Gen Control...

I am looking for parts to restore my 1938 Ford (Heyer) Laboratory Test Set. I purchased this some years ago and need some pieces to get it functional again. Primarily I need the "Interrupter & Gen Control Rheostat" and its knob. I would consider buying a complete unit if in the South...

I have a '53 Convertible and all the mechanism for raising/lowering the top has been removed. Is it worthwhile trying to source the parts to get it working again or is it just best to leave it as a manual top? I have heard that the original cable drive mechanism wasn't the best idea Ford had...

Looking for a full set but will buy singles too, Thanks, Meric Hoffman.