Search results

I'm going to replace the service brake cross shaft bushings on my '31. I was wondering what the diameter of the shaft, where the bushing go, should be to safely use the standard 2 piece bronze bushing. I would want to order a repair kit the same time that I order the bushings if needed. Thank you

I am thinking about replacing my 20 year old Firestone tires on my 31 coupe and looking for the latest recommendations. Tires are not worn out, just old. I would be interested to find out any of your recent experiences purchasing tires. Radials? New tubes? Thank you in advance for any advice.

Are the original hinge pins on the door knurled at the top of the shaft? Tried driving one up from the bottom but no luck due to the fact that you can't get a good angle with the punch and hammer. Also tried a small air hammer. Broke the Snyders tool. If the pin is knurled it would be...

The previous owner of my coupe told me to keep the edges of the top sealed but couldn't remember what product he used. I keep the top cleaned and treat it with that 303 cleaner and sealer but not sure what to use around the edges. Would sure like to hear what the Ford Barn folks like best

Is there anyway of freeing up the GAV on a Zenith carburetor. I put a different carb on my car and the GAV is very difficult to turn. Searched this forum but couldn't find much. Thanks in advance for any suggestions.

I saw a diecast model for sale and found an old article reviewing it and the article said it was Kewanee and Elkpoint Green but it kind of looks like Copra and Chicle to me. What do you think?

I just started to figure out how to install retractable seat belts in my 31 Coupe and have hit a snag on where to attach the inboard belts. My original idea was to follow Vince Falters great write up in Ford Garage a few years ago. I was going to reinforce the body cross member right behind...

I'm going to remove the seat in my 31 coupe. I have found a few posts about it. I see there are 6 screws on each side of the seat bottom that hold the frame to the pan, and there is a piece of fabric between the seat back cushion and the back shelf that is tacked in, but it feels like the top...

I recently installed a rebuilt 2 tooth steering gear. It is functioning just fine but I have a small oil leak from the area of the sector thrust screw or jam nut. Not a big leak but I don't think it should be leaking at all after being professionally rebuilt. Has anyone had a leak there or...

I was helping a group replace an engine this morning on a 28 and after pulling the old engine found it had a multi disc clutch. None of the group had any experience with the multi disc clutch. What all has to be done to convert to a standard clutch which came with the new engine. Differences...

I was wondering what the proper rear mounted spare tire lock is for a 1931 Coupe. I've seen some that are just a locking device on a lugnut but I can't see where those were original to a Model A. All I can find a reference to is the lock with a band on it. I've looked at the restoration...

I just installed a short pittman arm on my 31 coupe. Before installing it I checked the steering wheel movement. Turning to the left was 1 3/8 turns, turning to the right was 1 turn. After the short pittman arm was installed I can get 1 1/2 turns to the left and only 5/8 or a turn to the...

I installed a new tank valve and screen today in my 31. With the sediment bulb off I get a good flow of gasoline into a container. When I put the screen and cork gasket in and put the bowl on I get no gas. It had been working fine before as I even had a Wix filter in the bowl. Any ideas please.

I have about 2 1/2" of play in my steering wheel. I have attempted to adjust the steering gear following the steps outlined in 2 or 3 books and can't seem to get the play out of the steering wheel. All of the other components seem to be tight and the toe-in seems to be in line with the...

I was looking a 30 Coupe today that was for sale. It was a 20 year old restoration. Body and paint looked great for that age except what I would describe as the top edge of the rain gutter above the door on both sides of the body. It appears as if the top edge had pulled away from the body...