Search results

Black Cherry color Rebuilt motor with Full flow oil filter 5,000 miles Berg radiator Cast Iron brake drums Turn signals 3rd brake light in rear window All LED lighting Water temp and oil pressure gauges Working electric windshield wiper Pertronix Flame Thrower Ignition Coil Aries Muffler...

Recently ran across this info. I was not aware of this option beginning June 1931. May be of some interest to someone.

I have several useable vintage spark plugs, the center electrode has continuity. Make offer take one or all of them. Flat rate shipping is $4.95, all will fit in one box. 4) CO-OP C-55 5) Motorcraft TT10 1) AC C77

Why am I suddenly seeing advertising ? :(

Any idea what these may be? Found them in with a bunch of keys. They are Brass, stainless and aluminum.

Just found this tester, there are some instructions on it but is there some sort of instruction manual that goes with it? ​​​​​​​If anyone has info they would share I would appreciate it.

Had the pleasure of visiting a private collection. This is reported to be an authentic UPS package truck that was going to be hot rodded until they discovered what it was. It was then fully restored. Apparently UPS destroyed their vehicles when taken out of service or at the least removed all...

Will a tillotson float valve screw into a zenith carb? I suspect I may have found this.

Does this marking have any meaning?

Need the cast part, one of the mounting ears is broken off mine. I believe its a E.A. Laboratories EA-C1.

We have a couple of Holly carbs that neither have the secondary well in them. The hole in the body is not threaded and is to small in diameter to install one. Does the Holly not use the secondary well or are we missing something?

What needs to be changed when switching from early (AR) front brake drums to the later style? Wheel, brake drum/hub assembly, and backing plate is what I see that need to be changed, looks like bearings and races are the same. Is that it or am i missing something? It looks like these will fit...

I have a front brake hub/drum that I would like to have turned to clean it up. It doesn't have bearings or races in it. Can this be done without the races installed? Is there an acceptable amount of out of round? Thanks

Sold

I need to build the wood covering the tool storage area as well as the piece over the spare tire in my 37 hump back. Are dimensions or patterns and how they are fastened available?

Does anyone rebuild shocks for my 37? I only have 3 and they are stuck so I would also need the right rear.

I would like to convert my 37 to 12v negative ground alternator. I see Macs has a 12v neg ground alternator kit. What else would I need?

Got her started today and went for a short ride. First time she ran in 60 years. Had a bad ignition switch and all the wiring connections were bad plus a dead short. Water pumps were stuck so they were replaced along with a tune up and new plug wires. Need to rebuild the carb now and she should...

What does the "Resistance Unit" in the wire from the ignition do?

I'm getting my 37 2dr this week :) so I will be hanging around gathering as much info as I can. What service manual should I look for to get a start on things? I see Macs has flathead parts, anyone else recommended? Thanks Bob