Search results

Okay, i'm totally frustrated. thanks for any help. My '29 all of a sudden ate the battery. Ok got a new one . Somehow it was hooked up as negative ground when I bought it. Ran fine until the battery died. Hooked up the new battery as negative ground and no lights! Replaced the cut out with a...

Looking for a great quality used or NOS radiator to fir my 1928-29 A Roadster. Scammers need not reply, please be willing to ship to Illinois. Thanks

Working on my 28-29 Roadster. Radiator will not hold water. I've flushed it and filled it below the overflow tube, but it still continues to push water out the overflow tube when running. It's not leaking anywhere else. I'm stumped. Any help would be appreciated. Looks like a stock radiator to...

Searching for Mallory 4 cylinder Y3 11A rotor (24215?) and cap. NOS or EUC. Please let me know if you have either one or both. Goin in 28-29 Roadster 4 banger. Thanks, Art

Searching for Model A dropped front axle to fit '29 Roadster. Prefer good condition. Thanks, Art

Decided to do the front axle and hydro brakes on my roadster. Need a dropped front axle and all related (brake) parts. Don't want to use chinese junk. Let me know what you have. Thanks, Art

Searching for a great quality used or new Mallory distributor for my 28/29 4 banger Model A Roadster. Ready to buy. 31blackcoupe@gmail.com Thanks

5 rims and tires removed from running driving 1928 roadster size 4.75/5.00/5.25 x 21. 3 have great tread, 2 not usable for road use. Spokes and rims all straight and EUC. Local pick up only. Faded white walls Unable to upload pics. DM me and include your EM I'll send direct to you

I finally got this put together and it ain't quite right. Fresh build stock model A motor. Burns downdraft, Red's header, Burn's linkage, Hot coil. Started but won't idle unless choke is almost fully engaged. Idle screws do nothing, sounds like it's going to explode. Won't calm down. Too much...

Looking for any seat covers for a 1931 Tudor. Front seat(s) back seat any and all complete covers or pieces. Color not important, but currently beige/tan. Thanks 31blackcoupe@gmai.com

My '48 239 59ab is pushing oil out the bottom vent, like a lot. I pulled the intake and found the relief spring had bee stretched by the previous owner. I replaced it with an 80lb pressure spring, a new plunger and a new cap. Still pushing it out, but not as bad. Also tried Marvel oil before I...

Looking to buy an Aristocrat Dash for 1928-29 (30?) Model A Ford. I need the one for an OVAL speedometer. Please DM me, include shipping in price. Driver quality ok. Thanks, Art

AV8 project: 59ab in a '31 chassis-now moving on to the front end. Super Bell 4' drop axle, split stock wishbones, single leaf main spring, '37 cross steer box. Someone mentioned I should put a pan hard bar on that axle to prevent bump steer from the shackles moving side to side. All new parts...

Just wanted to give another thank you to Mac at Van Pelts Sales. I called him today to purchase more parts for my AV8 swap (59ab in a '31 chassis). I was having another issue getting the engine to clear the front cross member. He not only called me back (I left a message) he talked me through...

Looking for a 10" diaphragm (not long style) pressure plate to fit my '48 59ab project. Or a source for a new one would also be appreciated at a reasonable price. Thanks!

I am still struggling with this conversion of a Tremec T170 RTS Top Loader 3 speed w/overdrive circa late 70's-mid 80's. 4th gear is the overdrive. I am attempting to put it in my AV8 project, a 59ab V8 flathead. The trans had previously been greatly modified to fit a 4 banger model A. The input...

Removed this engine recently from my running, driving 1931 coupe. No issues ran great. No generator, distributor, transmission or clutch disc. Newer pressure plate, oil filter conversion and 5.5 compression cast iron head. Pick up only, what you see is what you get. [/ATTACH]

Drive shaft for 1931 (or other years that fit) Coupe wanted. Good usable original condition, NOS or Re-pop. Can include torque tube if available. I believe the part number is A-4605-B, should fit '28-'31. Thanks

Just removed my 4 banger which ran great with this F150 top loader overdrive transmission that was in the car when I bought it. I am now in the process of putting in a 1948 59ab Flathead V8. Does anyone know of an adapter solution and/or parts supplier to make this trans fit the V8 motor? Any...

Looking for a bumper bar bracket holds rear bumper bracket onto frame and rear spreader bar. Many years may fit. Thanks!