Search results

I am looking for the "Red Liquid" or Substitute for the Hydrostatic Gas Gauge on my 1934 Ford Car and Info re Installing the liquid,( if I can find the Red liquid ),I have flushed and cleaned the Gauge, installed a New copper Air line from the tank to the Gauge, any info re the calibration...

Can someone tell me if the Canadian 1937 Ford Transmissions have the Syncro Mesh in the gears like the 1939 transmissions years, thanks guys RS.:)

I have three numbers for possibly 39 ford transmissions, can anyone tell me if and what these numbers on the castings are for ? are they 39 or other years ,.Thanks so much 6E1- 6001 ..Top Loader 78- 7006 ..Top Loader 6A6-103 . Side Shifter Thanks for you response … RS

Could any one tell me what the Compression be in a 34 V/8, and if the motor should be warm when the Comp. test is performed, thanks guys.. RS :)

Is there a place in California that has the complete setup for conversion, to Hydraulic Brakes for my 1934 Ford Sedan, can someone tell me the Name and a website to check this out , Thanks Guys .. :)

Can a 1934 original Ford car transmission be changed out for a 1940 car Transmission what changes need to be done if not, thanks guys..:)

I have different serial numbers on my 1934- 4 dr Ford , can someone tell me what YEAR the Transmission is with a serial number of... C 18 M 2240.. stamped on the case at the top and a Serial # of... C 18 T 3742....stamped on the Frame , thanks for the input :)

I have the opportunity to get a 1948 Ford f1 3 speed transmission very reasonable, will this trans. fit up to a 1934 Ford sedan? a stock car, or do I have to take it all apart and change out the gears installing them in the 34 case, looking to get the syncro for my Ford sedan, also my 34 jumps...

I have a chance to pick up a good 36 Ford trans , can I replace my 34 Ford car trans with this one, the 36 , what modifications need to be done ? can I use the 34 Tower on the 36 Trans ..Thanks :)

I Just received my new Shackles for the Front & Rear Springs , I am changing out both Springs , are they a Press fit ? or do I have to hone out the holes in the spring Eyes so they fit ? the thru bolt insert; seams to be molded in Rubber, any help will be greatly appreciated, thanks ..:)

I would like to wire up a second horn in my 34, an Ahooga, using a Start button as a switch; (horn button ,) and a fuse inline with the horn , can someone tell me how to do this, or draw a circuit diagram, thanks in advance ..:)

Looking for a New , or NOS Mechanical Brake "Cross Shaft Spring" or where I can Purchase one , Reasonable , Thanks .. Rusty ..:confused:

deleted

I have a Tag for a body number, what numbers do I put on the tag, I was reviewing an ad for a 34 sedan the same as mine and his numbers were 730-LB -11134 are these correct and what do the numbers represent, thanks for your help.. R.:)

Could anyone tell me if a 1937 Ford transmission will fit in my 1934 Ford 4 Dr sedan , with the stock 34 motor , also the stock Trans , thanks guys ..:).

Replaced

I have a chance to get a 1938 Ford Motor and transmission , for my 1934 Ford sedan , will this setup fit in where my 34 motor and trans are ? , or do I have to do some modifications to fit the 38 m&t ; in the 34 Ford ..?:confused: Thanks guys ..:)

Will a Radiator from a 1937 /38 Ford fit in the 1934 Ford or does there need to be some modifications , Thanks .. D:)

I have a bad Chatter or Wobble when I hit a dip or rough spot in the road, the car a 1934 Ford 4 dr sedan, has to come almost to a complete stop before it settles down ,what is the cause , what is worn and how do I fix this terrible chatter , thanks guys :)

Can someone tell me if a part number is stamped on the Springs ? either Front or Rear, looking at Mac's info the part number is B-5560 on the rear , were the parts numbers stamped on original parts, thanks guys .. R:)