Search results

Wanted front & Rear wheel hubs off 40- 48 Ford passenger. Want to lose the wide five hubs & Rims from my 37 Tudor. When the change is made will have the wide five hubs & rims for sale. Thanks please list price. Zeke

How many cars have heaters, water, exhaust ? Zeke

WTB good wide 5 (1937-39) front brake drums & hubs. Also 47-48 brake hubs, front and rear. Zeke PM me.

What is the better lining for the brakes? A little history, my 37 Tudor has 48 hydraulic brakes with a dual master cylinder and the wide five drums. The backing plates I bought were fully assembled, I cleaned painted rebuilt wheel cylinders, the shoes and lining were in great shape so I reused...

I'm almost as old as my 37 ford ! Happy birthday to me turned 75 today, Whooooa !!!!! Gotta put a new speedometer cable in the Tudor today, will remember to lube it this time. Using Dorman speedometer cable lubricant. Zeke

I installed an Innovate MTX-L digital air/fuel ratio gauge. I'm running a 8BA bored to 3 5/16, a Mercury manifold with a Rochester 2GC carb for a 265-283 Chevy engine Main jets at #51, which I cleaned again blowing out all passages before test. Also a PVC valve., and crab distributor. At idle...

I have what appears to be a disassembled 21A crab distributor. But I seem to be missing A 12179 Washer and a 12177 lock. It is to lock the 12175 shaft assembly and 12176 cam and weight assembly together? I do not see these two parts listed in any suppliers parts list. Anyone know if these are...

OK I'm running a 8BA bored to 3 5/16, with merc manifold and crab distributor, EAB heads, PCV valve, using a 55 Chevy 265-283 Rochester 2GC. I'm presently jetted at #52, runs great except for a slight surging at steady throttle. Accelerate it goes away but soon as steady a slight surge again. I...

Looking for a good left side hood hinge 1937 Ford Tudor. Please PM me Zeke

It's always heart breaking when you lose an old friend, but there she goes, Zeke

Ordered a Walker Z Radiator for my 37 Tudor on Wednesday afternoon, it arrived here in Delta, PA today Friday UPS. Two days from Speedway. Can't really beat that service. Radiator looks great. Zeke

Anyone have a preference for a 37 Tudor radiator, prices all over the place. I'm leaning towards a Walker Z-495-1-FH, but open to suggestions. Had the original boiled out radiator shop wouldn't rod it said to many leak problems of course he said flowed good. 8BA with 3 5/16 bore . Thanks Zeke

Has any one tried the Griffin aluminum radiator $639 for their flat head ? Fit ? Cooling ? Quality ? This is for my 37 Tudor, thanks Zeke

I am going to install an Airtex E8016S fuel pump, 12 volt, on my 37 Tudor as an auxiliary pump to combat vapor lock. Question would it be best to use an momentary switch as I won't use a regulator this would keep from forgetting to turn off. Any body wire it this way ? Thanks Zeke

Weather was good today, close to 50 degrees, took the 37 out for it's maiden voyage since replacing the pressure plate in December, on the initial maiden voyage the clutch slipped needless to say everything but the PP was replaced, looked so good. Went about 30 miles today ran great after it...

Has anyone tried the Southern Air water heater 842H, which is 8 X 7 X 3". I drilled and taped my right pump for a heater fitting before I installed them and plugged same and the right 8EAB head has a place for fitting. This of course for my 37 Tudor. Any other recommended heater ? I removed the...

I'm running a Mercury manifold with a NOS Rochester 2GC, 7023064 small bore, I finally looked up the carb number and found it is off a Pontiac 389, whoa my engine was bumped to 3 5/16 bore but a long way from 389. I am running a crab distributor. I can down size the main jets, to #53, but don't...

Can the PCV valve be hooked thru the pipe fitting on the base of a 2GC I have used the mercury intake manifold port for the crab distributor vacuum. Thanks Zeke

What are you guys using for air cleaners on the Rochester 2GC, the flange is mighty small on the air horn. Zeke

My plans are to try and install carpeting in my 37 Tudor, God willing and the electric stays on. Have the front seat out so it's wall to wall carpet, I have the backing in and cut to size, will use that to rough cut the carpet fit. Anyone have plans? Zeke