Search results

I have a Gordon Smith Model A Ford compressor for sale. Engine has 190 hours on a complete rebuild. Runs really well, will fill the air tank from 0 psi to 120 psi and cycle down in 35 seconds. Tank is dated 1944 and is clean and free of rust inside. I have a spare cylinder head and three...

I have a 1946 G six that I removed from a 1/2 ton pickup. The engine is seized. Will sell all or will part out. Parts can be shipped, but the engine must be picked up at my shop in north central Arkansas. The exhaust manifold and exhaust heat shield has already been sold. Will take $75 for...

Here are a couple of photos of a truck Columbia axle that I saw at Petit Jean Arkansas show in June 1989. I have never seen another one like it. I didn't even know at the time that they exist. I should have taken more and better photos.

I have a running Gordon & Smith Model A compressor that I am thinking about selling, but I have no idea what the value would be. The engine has 190 hours since a complete rebuild about 25 years ago. It has been bored .100 over, crank turned with mains repoured and fitted, and rebuilt connecting...

I have one 81C-13468 RH tali light bracket for sale. This is a reproduction that I welded from steel components. It is a mirror image of the 77-13468-B LH bracket and is appropriate for 1938-1952 1 1/2 ton and larger trucks. I am asking $50.00 plus $7.90 shipping in a small priority mail box...

https://www.fordbarn.com/attachments/447755/

Does anyone have a photo of an 8A-17080-C hydraulic bumper jack that was available from Ford as an option (I believe) for the '48 car? I am not sure how to post photos here, I have a hydraulic bumper jack that I would like to identify. Thanks, Mark Poley

The accessory catalog for the '49 ford truck shows a windshield washer. Has anyone seen one of these installed? I was wondering what the spray nozzles looked like and where they are mounted. Thanks, Mark

I am looking for the part number and source for the sealing "tape" that goes between the inner and outer fenders and also fenders and grill pieces on the '49-'52 F series trucks. My truck has a woven asphalt impregnated fabric 1" wide and almost 1/16" thick bolted between all these pieces. I've...

I am converting my '49 F4 to 12V. I plan on keeping the stock starter button and ignition switch. Is there a 12v solenoid that will work with the stock starter button? On my previous truck, a '47 COE, I used an original Ford 6V solenoid when I converted it to 12V. I drove it that way for...

I was tinkering on my '49 F4 truck today while I had a long slow cut going in my lathe. I wanted to check the passenger hood hinge for clearance for an under hood modification I'm working on. When I went to install the firewall part of the hinge I noticed the original paint on the side of the...

There have been some really nice car photos posted here, and I find the right hand drive cars particularly interesting. I guess because it seems so odd to me when I see a photo of a car with the "drivers side door" open and the steering wheel is on the far side of the car.:D So, my question is...

'66 Ranch Wagon, good title, no engine or rear axle. Roof, windshield and drivers rear fender damage from an ice storm. The rest of the glass is good. Very straight front end and grill, and the rest of the body is really good with the exception of the noted ice storm damage. Can E-mail photos if...

'35 or '36 1 1/2 ton truck chassis, 158" wheel base, with pre '37 engine transmission, Eaton two speed rear axle. A complete chassis with fenders and running boards. No front bumper, cab, hood or grill. Steering column was sawed off just above the box. Engine is seized, drivers side head has a...

I need the rear bearing retainer/transmission mount for a '48-'52 Syncro-Silent T98 Warner 4 speed transmission. The part number cast into it is 8MTH-7085. Thanks, Mark Poley

I need the air deflector inside the front of the hood, the air deflector in front of the bottom of the radiator that bolts to the panel under the grill, and the stands under the battery tray for a 6 cylinder '48-'50 F1- F6 truck. The condition of the battery tray is not important as long as the...

I have a question for the board, I hope this is the appropriate place to post this. I need to have a radiator recored for my '49 F4 truck. I have a number of radiators that I can sell for scrap to fund my radiator repair. I have several '42-'48 V8 car radiators, '42-'52 V8 truck radiators, a '53...