Search results

My filler tube leaks. It is kind of lose in the block. Cap fits well. How firmly is it supposed to fit in the block ? Mine is easily moved when you grab it. I have no idea how old it is, certainly not since 1929. Thanks for your thoughts. Bill

I have reached the point where I need to rebuild or replace my 2 tooth steering gear and considering the rebuild versus a F-100 Ford pickup gear from Randy Gross. If you have done the exchange I would appreciate your input so I can make a good decision. Thanks, Bill

What is the length and thread of the screws for holding the radiator apron and front fender and hood shelves ? Looks like stainless oval head. Thanks for your thoughts. Bill

How about a picture of you Dave ?

Thinking of carrying two spare wheels/tires on the back of my '29 roadster on the normal carrier. But I wonder if the unit is strong enough or does it need to be reinforced ? Bill

I am tired of bumping down the road. I now have a collection of 11 wheels that are out of round. I am looking for recommendations of who sells perfect, new 21 inch for my Model A. I'd like opinions on Coker, Snyders, Mikes and Brattons. Ecklers is out. Maybe they all come from same source. Any...

I have a question of how to fasten the roadster rumble seat back rest cushion. Mine has two tabs at the top that slide into openings at the top of the rumble lid. They fit nicely. BUT at the bottom of the cushion on either side there a two metal tabs with slotted holes and matching the tabs on...

I need it for my Stipe shocks. This is what they use. I have tried many, many sources. Tell me where you have found it please. Thanks, Bill

Does anyone know of a source for these where the bolt head area has been cut out so the pan bolts are accessible for tightening ? Thanks.

I understand that Model a lug nuts need to have the thread relieved ( cut back) for proper fit at the bottom. My current ones are not and I can't tell from the suppliers descriptions. Anny suggestions of who sells the correct ones ? Thanks, Bill

I need new tires and am looking at American Classic radials but have read posts that warn of bad tube performance. If you have had good luck please tell what tubes you use. Thanks, Bill

I have 4 Stipe/Houdaille shocks on my A roadster. I put the car up for the winter because of salt on our roads. My question is lubing them next spring. Each shock link has a grease fitting on the bottom but I am a bit concerned about the top. I can't figure that grease put in in the bottom is...

At the top of the link is a threaded plug that screws in and then is secured with a cotter pin. How tight should this plug be screwed down ? Thanks, Bill

I'm sure many of you have received a notice from Hemmings that they have 2023 Model A Ford calendars. Probably got a lot of grief last year. Looks like a good one. Bill

How tight do you screw down the top cap in the shock link before putting in the cotter pin ? Thanks.

Big day tomorrow as I start to put 4 new Stipe shocks on my roadster. Please fill me in with suggestions/things to avoid and things to watch for. Be pleased to hear from you. Bill

Ford Service Bulletins and Les Andrews Volume 1 show various pictures of the shock connecting link with the lube fitting on the top and the bottom of the link. Which is correct ? Thanks.

I have often wondered about the ratio between 1st and 2nd gear. They seem to me to be quite close. Often it is possible to start the car moving in 2nd gear. However, the ration between 2nd and 3rd/high is not at all close. My question is why did the Ford folks design the transmission with these...

My doors appear fine on my car. They close tightly, stay closed while driving and do not rattle. They open/close easily. Today I met a roadster owner who commented that, when shut tight, the door skin sticks out 1/8" - 3/16" beyond the body skin at the rear of the door top and bottom. Fronts are...

I too am upset with Hemmings, but making a comment on this forum about the Model A calendar only reaches the enthusiasts. I called the Customer Service phone number at Hemmings with my comments. I think that you should do the same thing and get listened to: 800-227-4373 extension 79550 Perhaps...