Search results

My good friend and Starliner/Sunliner aficionado died recently. He had restored a '61 Sunliner frame off. It is all new with 352 CID, C6 and all the rest. Trying to sell it for his widow. Any ideas where to start price wise? Original Ford yellow with black interior and white top. Drive any where.

Need left and right door glass lift channels and left and right door lock cylinder lever with the little springs that attach them to the lock. These levers are what goes between the key lock and the lock mechanism. Also need the trim for the headliner that screws into the tack strip at the rear...

Have a tach with only 2 wires; red and black. How is this supposed to be wired? Am I correct in assuming red is 12v and the black goes to - coil post? It is a big block ford with Pertronix III.

Has anyone used a Borgeson P/S box on a '60 Ford and how much modification did you incur? How did it work out? My friend is putting one on a Starliner and it is turning out to be quite an ordeal. He has had to cut the column by about 6" and is having to manufacture a way to secure the lower...

I'll be taking the Ranchero off the rotisserie shortly and am about to start the mechanical work on the chassis. Need to know if anyone has adapted a rack and pinion from a donor car and what will fit. I have seen after market kits but when all is said and done, the turning radius is greatly...

I found a local supplier for rebuild kits for the Aluminum case 2-speed Ford-O-Matic that was used from '59 to '64. I haven't been able to find a filter. Anyone know of a source?

I have a '51 car that has an AOD transmission. As such, there does not appear to be room underneath for a power brake booster, nor do I really want P/Bs. I have contacted a vendor that also suspects that there would be a space issue. What I need to know is if there is a fairly simple bolt on...

I am working on a '57 Ford. Someone told me yesterday that the Fairlane 500 fenders are 2" longer than the Custom fenders and that the hood is longer. I know the wheelbase is 2" longer and that the frame, doors and quarter panels are longer, but can anyone tell me if the fenders and hood are...

Need several parts: Inner fenders Front bumper braces Tailgate latching parts (all of internal pieces) Inside door window frame for 2 dr sedan Hood part that bolts to the hood and interfaces with the latch Jacksonville, Fl area Jim 904 571-4323

Need the bed corner trim that goes on top of the box at the rear left and right corner. Prefer stainless, but will consider chrome. Repairable is okay too. Jim 904 571-4323

I have a restored '55 fairlane with all new original style wiring and new ignition switch and solenloid. There is no resister as it is 6 volt. I am anal about grounds and firm connections and in fact have rechecked for a loose connection several times. It is still 6 volt and has a heavy duty...

Driving the '51 to Newnan, Ga (SW of Atlanta) this Friday. Be there 'til Sunday. Anyone know of a cruise-in going on in the area this week end? Prefer Fri or Sat evening. Not a show-car or trailer queen; it's a driver, so not looking for a show, just a fun cruise. We are not afraid to drive a...

Driving the '51 to Newnan, Ga (SW of Atlanta) this Friday. Be there 'til Sunday. Anyone know of a cruise-in going on in the area this week end? Prefer Fri or Sat evening. Not a show-car or trailer queen; it's a driver, so not looking for a show, just a fun cruise. We are not afraid to drive a...

I have a '51 Victoria in which I have changed the speedometer gear so that it reads correctly according to two different GPS's. My problem is that the odometer is about 10% slow. While going down the Interstate, when the odometer indicates I have traveled 20 miles, both of the GPS's indicate I...

I have a tool that appears to be a Go/No-Go guage. Made by K.R. Wilson P/N 41-G-195. Can some one tell me what this is? Thanks, Motorhead

Need a complete set of drip rail mouldings for a 1951 Ford Victoria. Need to include the small over gap pieces. When I had my Vicky glass bead blasted a few years ago, the rascals took them off and threw them away! VR, Motorhead

Looking for the trim that is located above the license plate fixture on the trunk lid of a 1951 Ford car with automatic transmission. I think it says "Automatic Drive". May say "Ford-O-Matic Drive". This is a simple flat plate that conforms to the shape of the license plate housing or fixture...

Oops. Wrong place.

I am installing a 4V manifold on my flathead in my '51 Vicky which requires the small base bolt pattern. I do not want to use an adapter for the larger carburetor as this looks a little odd to me. This desire limits me to an early GM WCFB or the Ford Holley 4000 series tea pot style carb. I have...

Have a nice set of headers for Y-Block in '53 thru '60 F-100. Surface rust, but solid. No cracks or holes. $75.00 for local pick up.