Search results

Correct auto tire pressure for 1940 ford

I would like to install seat belts on my 40 Ford. Is there any info available. Thanks Warren :confused:

I have been driving my car for over 10 years with no problems. Today it started jumping out of high gear into neutral. Does this call for a readjustment of the shifting linkage and if so some advice please. Thanks Warren:confused:

Does anyone have a manual for this unit? Thanks Warren

I found some 90 wt. gear lube at Tractor Supply that is for Ford tractors . The brand name is Travelers .It is listed GL 1. Would this be suitable for my 40 transmission? Would this also work for the differential? Thanks Warren

What could be causing my transmission on my 28 tudor to jump out of high gear occasionally while driving. Warren

When replacing clutch on a 40 convertible should I disconnect springs from the chassis by loosening the U bolts and leave springs attached to running gear or use a spreader and leave springs attached to the chassis ? Thanks Warren

Is there a website or anywhere I can find part numbers and I Ds for old Ford parts . I have accumilated several boxes full with tags and numbers and don't know what year or body style they fit. I do know they are not for 1940 or model A. Thanks Warren

How many splines are on a 40 clutch disc?

Should I prime my new fuel pump on my 40 before I install it or just install and crank away. If so what is the proper method. Thanks Warren

Anyone know of a method to get the wrinkles and creases out of my convertible top. l left the top down for a good while this summer. Warren

What is the procedure for installing front and back belts. Some pictures and or drawings would be appreciated. Thanks Warren

I cant find the web site that describes take down and repairs for the multi disc clutch. I was thinking Tom Endy's Local A club had an article by him. Warren

Wheel cyl. leaked[ DOT 3] and had to repaint backing plate. Decided to go with silicone fluid this time around. Installed new shoes, wheel cyls. and MC . After bench bleeding and installing MC adj. brake pedal1/4 free play and push rod just almost touching.With help bled each wheel until no air...

Just put my two new rear wheel cylinders from Macs on my 40ford . Both of the cylinders were leaking at the hard line fittings. Seems like I read a posting on the barn that the Chinese pipe threads were different from ours. Could this be the reason for the leaks? Any suggestions or ideas to...

I just purchased a new M C [made in Mexico] for my 40 from Advance Auto . It has a steel filler cap on the reservoir with a removal brass fitting screwed into the cap. The brass fitting has the small hole for relief. There is a baffle or diverter attached to underside of the cap. This is...

I have a bad vibration in my 28 tudor.I installed the 0riginal multi disc clutch and was wondering if this could be my problem. Also the engine is bolted to the frame at the front. {no floatamotor}. Any help and, or, suggestions will be appreciated. Warren

Does anyone make an inline check valve for automobiles?

:confused:Will it damage or disfigure a convertible top if left in the down position for several weeks ? Thanks warren

I need a ,decent , original , R Rear scuff plate for 35-36 four door sedan.