Search results

Hello: Was wondering if anyone out there could tell me what size bolts are used to hold the oil pan to the engine bottom, head thickness not a concern, on my 1937 85hp. thank you RICHARD

Hello, I have a question regarding a small bracket used to support the starter motor to the oil pan. I would guess to protect the ring gear on start ups. My problem is that I can't see how it attaches to my to my engine or if it ever had one. MY CAR IS A 1937 FORD 21 stud , 221 inch 85hp...

Hello: Looks like I can use some help here. My speedo cable has been yelling at me so I disconnected lt from ****** and gauge. Pulling from the gauge end, the inner cable will rotate but will not pull out. All loading has been removed from outer cable. Have I done anything wrong yet...

Could anyone post a picture that could somehow show how these arm rests attach to the left door structure? Thank you very much.;)

Hello; I am trying to finish a '37 sedan but I need a passenger side stock sun visor. If you have an extra that you would ike to sell, please contact me. Richard 352-503-3918 rich37cpe@optonline.net

Dear Fellow Ford Barners, I am finishing up a 1937 Ford sedan and am in need of a passenger side, right side stock type sun visor. Your help would be greatly appreciated.. Richard rich37cpe@optonline.net 352-503-3918.:confused:

Could someone post a picture of a deluxe '39 steering wheel please? thanks, Rich;)

Have a stock 37 sedan with directional lights using 4 bee hive add-on lights. I would like to replace these bulbs with LED bulbs, single contact. Can anyone recommend a supplier? thank you, Rich:mad:

I have converted most of the lights in my Ford TO 6 VOLT LEDs. They work well and limit power usage. I am' however' still still using the original headlight bulbs and was wondering if anyone could recommend an easy swap for better front lighting. Thanks to all. Richard:confused:

Hello fellow Barners I have a '37 85hp. sedan with a cast iron intake manifold. My book calls out a 7.87inch pushrod for an alum. intake but says nothing for the cast iron. Can anybody tell me what push rod I should be using? Thanks Rich:confused:

Hello Barners: Can anyone recommend the proper tube for a 1937 Ford rim It looks like a 5/8 rim hole for the Valve stem to pass- through. Thank you.

Hello Fellow Barners: My '37 Tudor has no Arm Rest on the passenger front door and was wondering if any of you had an old rebuildable one around to sell to me. Thanks, Rich.

Dear fellow Fordbarners: I recently had to change the Master Cylinder on my '37 tudor, which has the 39 Brake system. I also changed all the Fittings, Hoses and Lines. With a friend's help the entire system was bled. What happens now is that when I initially step on the Brake Pedal it travels...

I Have a '37 Ford with a 85 hp engine and was hoping that someone wiser than me could give me some help. I am attempting to install the driver's side engine splash pan on a full up car. I've disconnected the Drag Link from the Pitmann Arm and dropped the Tie Rod end from the spindle on that...

Hello fellow Ford Barners: Please help me finish my 1937 Ford Sedan. I need the clips that cover the horizontal Butt Joints on the windshield frame sides. If you can spare a couple to sell or if they are currently mounted to an old windshield frame that you would sell, please let me know. It...

Hello: I am looking for a set of decorative clips for a 1937 Windshield. I would appreciate any help. Thanks, Rich

I took a Father's Day ride in my '37 tudor Sunday and had a great ride. Upon arrival back home, however, after shutting down the engine I pushed down the handle to open the door and the door would not open I then stuck my hand out the window figuring that the outside handle might do the trick...

Hello: Has anyone had problems with alcohol fuel boiling in the carb? I have been told that placing a plate, metal or phenolic, between carb and manifold will eliminate this problem. Would anyone like to elaborate on this? Rick

Hello: I need to know what the lubricant of choice would be for the Univeral Joint on a stock flathead 39 Ford. I know many people use the regular chassis grease but it seems to me that this grease would quickly move out from the spinning joint and not lubricate it. Any advice on what to use...

Happy New Year fellow Ford Barners: I am looking for the small clips (2) that hide the butt slots between the two windshield halves for my 37 ford sedan . To my knowledge these have yet to be reproduced. They are the same for trucks that year and I would presume for all 38 closed cars and...